This is a note to let you know that I've just added the patch titled
usb: common: otg-fsm: only signal connect after switching to peripheral
to the 3.19-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
usb-common-otg-fsm-only-signal-connect-after-switching-to-peripheral.patch
and it can be found in the queue-3.19 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <[email protected]> know about it.
>From a886bd92267c9e3d5c912860c6fb5a68479a7643 Mon Sep 17 00:00:00 2001
From: Peter Chen <[email protected]>
Date: Thu, 12 Mar 2015 09:47:53 +0800
Subject: usb: common: otg-fsm: only signal connect after switching to peripheral
From: Peter Chen <[email protected]>
commit a886bd92267c9e3d5c912860c6fb5a68479a7643 upstream.
We should signal connect (pull up dp) after we have already
at peripheral mode, otherwise, the dp may be toggled due to
we reset controller or do disconnect during the initialization
for peripheral, then, the host may be confused during the
enumeration, eg, it finds the reset can't succeed, but the
device is still there, see below error message.
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-0:1.0: unable to enumerate USB device on port 1
Fixes: the issue existed when the otg fsm code was added.
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/common/usb-otg-fsm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/common/usb-otg-fsm.c
+++ b/drivers/usb/common/usb-otg-fsm.c
@@ -150,9 +150,9 @@ static int otg_set_state(struct otg_fsm
break;
case OTG_STATE_B_PERIPHERAL:
otg_chrg_vbus(fsm, 0);
- otg_loc_conn(fsm, 1);
otg_loc_sof(fsm, 0);
otg_set_protocol(fsm, PROTO_GADGET);
+ otg_loc_conn(fsm, 1);
break;
case OTG_STATE_B_WAIT_ACON:
otg_chrg_vbus(fsm, 0);
@@ -213,10 +213,10 @@ static int otg_set_state(struct otg_fsm
break;
case OTG_STATE_A_PERIPHERAL:
- otg_loc_conn(fsm, 1);
otg_loc_sof(fsm, 0);
otg_set_protocol(fsm, PROTO_GADGET);
otg_drv_vbus(fsm, 1);
+ otg_loc_conn(fsm, 1);
otg_add_timer(fsm, A_BIDL_ADIS);
break;
case OTG_STATE_A_WAIT_VFALL:
Patches currently in stable-queue which might be from [email protected]
are
queue-3.19/usb-common-otg-fsm-only-signal-connect-after-switching-to-peripheral.patch
queue-3.19/usb-chipidea-otg-add-a_alt_hnp_support-response-for-b-device.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
