Dear Gregory CLEMENT, On Wed, 15 Apr 2015 12:40:47 +0200, Gregory CLEMENT wrote: > There is no crystal connected to the internal RTC on the Open Block > AX3. So let's disable it in order to prevent the kernel probing the > driver uselessly. Eventually this patches removes the following > warning message from the boot log: > "rtc-mv d0010300.rtc: internal RTC not ticking" > > Signed-off-by: Gregory CLEMENT <[email protected]> > Cc: <[email protected]> # v3.8 +
If an external crystal is needed on the board for the internal RTC, then shouldn't instead the RTC have status = "disabled" in the SoC-level .dtsi, and each board enabling it in its own specific .dts, like we do for all other hardware blocks that require/use external components/connexions? Or, because the AX3 appears to be the only board in this case, we decide to factorize enabling the RTC in the .dtsi, and leave it as a special case to handle in the AX3 .dts ? Thanks, Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
