This is a note to let you know that I've just added the patch titled
hpsa: refine the pci enable/disable handling
to the 3.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
hpsa-refine-the-pci-enable-disable-handling.patch
and it can be found in the queue-3.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <[email protected]> know about it.
>From 132aa220b45d60e9b20def1e9d8be9422eed9616 Mon Sep 17 00:00:00 2001
From: Tomas Henzl <[email protected]>
Date: Thu, 14 Aug 2014 16:12:39 +0200
Subject: hpsa: refine the pci enable/disable handling
From: Tomas Henzl <[email protected]>
commit 132aa220b45d60e9b20def1e9d8be9422eed9616 upstream.
When a second(kdump) kernel starts and the hard reset method is used
the driver calls pci_disable_device without previously enabling it,
so the kernel shows a warning -
[ 16.876248] WARNING: at drivers/pci/pci.c:1431 pci_disable_device+0x84/0x90()
[ 16.882686] Device hpsa
disabling already-disabled device
...
This patch fixes it, in addition to this I tried to balance also some other
pairs
of enable/disable device in the driver.
Unfortunately I wasn't able to verify the functionality for the case of a sw
reset,
because of a lack of proper hw.
Signed-off-by: Tomas Henzl <[email protected]>
Reviewed-by: Stephen M. Cameron <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/hpsa.c | 42 ++++++++++++++++++++++++++++--------------
1 file changed, 28 insertions(+), 14 deletions(-)
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3984,10 +3984,6 @@ static int hpsa_kdump_hard_reset_control
/* Save the PCI command register */
pci_read_config_word(pdev, 4, &command_register);
- /* Turn the board off. This is so that later pci_restore_state()
- * won't turn the board on before the rest of config space is ready.
- */
- pci_disable_device(pdev);
pci_save_state(pdev);
/* find the first memory BAR, so we can find the cfg table */
@@ -4035,11 +4031,6 @@ static int hpsa_kdump_hard_reset_control
goto unmap_cfgtable;
pci_restore_state(pdev);
- rc = pci_enable_device(pdev);
- if (rc) {
- dev_warn(&pdev->dev, "failed to enable device.\n");
- goto unmap_cfgtable;
- }
pci_write_config_word(pdev, 4, command_register);
/* Some devices (notably the HP Smart Array 5i Controller)
@@ -4525,6 +4516,23 @@ static int hpsa_init_reset_devices(struc
if (!reset_devices)
return 0;
+ /* kdump kernel is loading, we don't know in which state is
+ * the pci interface. The dev->enable_cnt is equal zero
+ * so we call enable+disable, wait a while and switch it on.
+ */
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ dev_warn(&pdev->dev, "Failed to enable PCI device\n");
+ return -ENODEV;
+ }
+ pci_disable_device(pdev);
+ msleep(260); /* a randomly chosen number */
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ dev_warn(&pdev->dev, "failed to enable device.\n");
+ return -ENODEV;
+ }
+
/* Reset the controller with a PCI power-cycle or via doorbell */
rc = hpsa_kdump_hard_reset_controller(pdev);
@@ -4533,10 +4541,11 @@ static int hpsa_init_reset_devices(struc
* "performant mode". Or, it might be 640x, which can't reset
* due to concerns about shared bbwc between 6402/6404 pair.
*/
- if (rc == -ENOTSUPP)
- return rc; /* just try to do the kdump anyhow. */
- if (rc)
- return -ENODEV;
+ if (rc) {
+ if (rc != -ENOTSUPP) /* just try to do the kdump anyhow. */
+ rc = -ENODEV;
+ goto out_disable;
+ }
/* Now try to get the controller to respond to a no-op */
dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n");
@@ -4547,7 +4556,11 @@ static int hpsa_init_reset_devices(struc
dev_warn(&pdev->dev, "no-op failed%s\n",
(i < 11 ? "; re-trying" : ""));
}
- return 0;
+
+out_disable:
+
+ pci_disable_device(pdev);
+ return rc;
}
static int hpsa_allocate_cmd_pool(struct ctlr_info *h)
@@ -4690,6 +4703,7 @@ static void hpsa_undo_allocations_after_
iounmap(h->transtable);
if (h->cfgtable)
iounmap(h->cfgtable);
+ pci_disable_device(h->pdev);
pci_release_regions(h->pdev);
kfree(h);
}
Patches currently in stable-queue which might be from [email protected] are
queue-3.14/hpsa-refine-the-pci-enable-disable-handling.patch
queue-3.14/hpsa-add-missing-pci_set_master-in-kdump-path.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
