This is a note to let you know that I've just added the patch titled
usb: dwc3: gadget: don't clear EP_BUSY too early
to the 4.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
usb-dwc3-gadget-don-t-clear-ep_busy-too-early.patch
and it can be found in the queue-4.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <[email protected]> know about it.
>From e18b7975c885bc3a938b9a76daf32957ea0235fa Mon Sep 17 00:00:00 2001
From: Felipe Balbi <[email protected]>
Date: Fri, 29 May 2015 10:06:38 -0500
Subject: usb: dwc3: gadget: don't clear EP_BUSY too early
From: Felipe Balbi <[email protected]>
commit e18b7975c885bc3a938b9a76daf32957ea0235fa upstream.
In case of non-Isochronous transfers, we don't
want to clear DWC3_EP_BUSY flag until XferComplete
event. That's because XferInProgress was only enabled
so we can recycle TRBs and usb_requests quicker, but
there are still other pending requests being transferred.
In order to make sure we don't allow for another StartTransfer
command while the HW is still processing other transfers,
we must keep DWC3_EP_BUSY flag set and this what this patch
does.
Fixes: f3af36511e60 (usb: dwc3: gadget: always enable IOC on
bulk/interrupt transfers)
Reported-by: sundeep subbaraya <[email protected]>
Tested-by: sundeep subbaraya <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/gadget.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1906,12 +1906,16 @@ static void dwc3_endpoint_transfer_compl
{
unsigned status = 0;
int clean_busy;
+ u32 is_xfer_complete;
+
+ is_xfer_complete = (event->endpoint_event == DWC3_DEPEVT_XFERCOMPLETE);
if (event->status & DEPEVT_STATUS_BUSERR)
status = -ECONNRESET;
clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
- if (clean_busy)
+ if (clean_busy && (is_xfer_complete ||
+ usb_endpoint_xfer_isoc(dep->endpoint.desc)))
dep->flags &= ~DWC3_EP_BUSY;
/*
Patches currently in stable-queue which might be from [email protected] are
queue-4.1/usb-f_mass_storage-limit-number-of-reported-luns.patch
queue-4.1/usb-dwc3-reset-the-transfer-resource-index-on-set_interface.patch
queue-4.1/usb-musb-host-rely-on-port_mode-to-call-musb_start.patch
queue-4.1/usb-gadget-mv_udc_core-fix-phy_regs-i-o-memory-leak.patch
queue-4.1/usb-dwc3-gadget-don-t-clear-ep_busy-too-early.patch
queue-4.1/usb-gadget-composite-fix-null-pointer-dereference.patch
queue-4.1/usb-dwc3-gadget-return-error-if-command-sent-to-depcmd-register-fails.patch
queue-4.1/usb-phy-mxs-suspend-to-ram-causes-null-pointer-dereference.patch
queue-4.1/usb-gadget-f_fs-do-not-set-cancel-function-on-synchronous-read-write.patch
queue-4.1/usb-dwc3-gadget-return-error-if-command-sent-to-dgcmd-register-fails.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
