On Thu, Sep 03, 2015 at 09:06:48AM +0200, Boris Brezillon wrote:
> The USER_DATA register cannot be accessed using byte accessors on A13
> SoCs, thus triggering a bug when using memcpy_toio on this register.
> Declare two helper macros to convert an OOB buffer into a suitable
> USER_DATA value and vice-versa.
>
> This patch also fixes an error in the oob_required logic (some OOB data
> are not written even if the user required it) by removing the
> oob_required condition, which is perfectly valid since the core already
> fill ->oob_poi with FFs when oob_required is false.
>
> Signed-off-by: Boris Brezillon <[email protected]>
> Cc: <[email protected]> # 3.19+
> Fixes: 1fef62c1423b ("mtd: nand: add sunxi NAND flash controller support")
>
> ---
> Changes since v2:
> - add the NFC_USER_DATA_TO_BUF() macro and rename NFC_USER_DATA() into
> NFC_BUF_TO_USER_DATA()
> - rework the commit message
>
> Changes since v1:
> - drop the !oob_required conditional path
> - replace endianness conversions by a macro relying on byte shifting
> operations
> ---
> drivers/mtd/nand/sunxi_nand.c | 33 ++++++++++++++++-----------------
> 1 file changed, 16 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
> index f97a58d..f9b5a4c 100644
> --- a/drivers/mtd/nand/sunxi_nand.c
> +++ b/drivers/mtd/nand/sunxi_nand.c
> @@ -147,6 +147,17 @@
> #define NFC_ECC_MODE GENMASK(15, 12)
> #define NFC_RANDOM_SEED GENMASK(30, 16)
>
> +/* NFC_USER_DATA helper macros */
> +#define NFC_BUF_TO_USER_DATA(buf) ((buf)[0] | ((buf)[1] << 8) | \
> + ((buf)[2] << 16) | ((buf)[3] << 24))
I thought you were treading on thin ice with bit-shifting a uint8_t, but
it appears that C integer promotion rules are on your side here. (The
result of this operation should be an int.)
> +#define NFC_USER_DATA_TO_BUF(buf, val) \
BTW, why do you need this macro? It's currently unused. Just as an
example? I can take it as-is if you'd like, but I was curious why you
felt the need for this in v3, especially for -stable.
Brian
> + { \
> + (buf)[0] = val; \
> + (buf)[1] = val >> 8; \
> + (buf)[2] = val >> 16; \
> + (buf)[3] = val >> 24; \
> + }
> +
> #define NFC_DEFAULT_TIMEOUT_MS 1000
>
> #define NFC_SRAM_SIZE 1024
> @@ -646,15 +657,9 @@ static int sunxi_nfc_hw_ecc_write_page(struct mtd_info
> *mtd,
> offset = layout->eccpos[i * ecc->bytes] - 4 + mtd->writesize;
>
> /* Fill OOB data in */
> - if (oob_required) {
> - tmp = 0xffffffff;
> - memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp,
> - 4);
> - } else {
> - memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE,
> - chip->oob_poi + offset - mtd->writesize,
> - 4);
> - }
> + writel(NFC_BUF_TO_USER_DATA(chip->oob_poi +
> + layout->oobfree[i].offset),
> + nfc->regs + NFC_REG_USER_DATA_BASE);
>
> chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1);
>
> @@ -784,14 +789,8 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct
> mtd_info *mtd,
> offset += ecc->size;
>
> /* Fill OOB data in */
> - if (oob_required) {
> - tmp = 0xffffffff;
> - memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp,
> - 4);
> - } else {
> - memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, oob,
> - 4);
> - }
> + writel(NFC_BUF_TO_USER_DATA(oob),
> + nfc->regs + NFC_REG_USER_DATA_BASE);
>
> tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ACCESS_DIR |
> (1 << 30);
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
