On Wed, Jan 6, 2016 at 12:43 AM, Rob Herring <r...@kernel.org> wrote: > On Tue, Jan 5, 2016 at 2:59 AM, Linus Walleij <linus.wall...@linaro.org> > wrote:
>> diff --git a/arch/arm/boot/dts/versatile-ab.dts >> b/arch/arm/boot/dts/versatile-ab.dts >> index 01f40197ea13..3279bf1a17a1 100644 >> --- a/arch/arm/boot/dts/versatile-ab.dts >> +++ b/arch/arm/boot/dts/versatile-ab.dts >> @@ -110,7 +110,11 @@ >> interrupt-parent = <&vic>; >> interrupts = <31>; /* Cascaded to vic */ >> clear-mask = <0xffffffff>; >> - valid-mask = <0xffc203f8>; >> + /* >> + * Valid interrupt lines mask according to >> + * table 4-36 page 4-50 of ARM DUI 0225D >> + */ >> + valid-mask = <0x0760031b>; > > I never really liked valid-mask in the first place. Valid interrupts > are the ones specified by devices and we don't need this extra data. > If we do, then *every* interrupt controller needs this property. > Perhaps the driver should just ignore it. But you've already done the > work here, so this is okay too. It's a migrated feature from the boardfile days as it happens. Before commit d7057e1de8d6c180eb2ecd90b0cab9d1a8a4d8ab "ARM: integrator: delete non-devicetree boot path" the Integrator/CP was doing this: static void __init intcp_init_irq(void) { u32 pic_mask, cic_mask, sic_mask; /* These masks are for the HW IRQ registers */ pic_mask = ~((~0u) << (11 - 0)); pic_mask |= (~((~0u) << (29 - 22))) << 22; cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START)); sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START)); /* * Disable all interrupt sources */ writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR); writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR); writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR); writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR); writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR); writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR); fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START, -1, pic_mask, NULL); fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START, -1, cic_mask, NULL); fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START, IRQ_CP_CPPLDINT, sic_mask, NULL); (...) The clear-mask and valid-mask:s found in arch/arm/boot/dts/integratorcp.dts comes from this for example. And that is a modernization of code that was always there. I think it's because the Integrator will crash if you try to even clear a non-existing interrupt by writing a '1' in the wrong bit, and that is why we have the clear-mask. And valid-mask is to avoid even mapping one of these non-existing IRQs. The issue doesn't seem to exist on the Versatile (I tried with 0xffffffff and it worked) and probably not on Integrator QEMU either, but on the real hardware I've experienced it. So the FPGA interrupt controller is sensitive stuff ... and it seemed natural to preserve this overzealous code (and bindings). Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html