Rename MAC_CSR13_BIT<x> to MAC_CSR13_VAL<x> and MAC_CSR13_DIR<x> to represent the actual meaning better. Clean up list to only mention the active GPIO pins, not just all bits.
Signed-off-by: Gertjan van Wingerde <[email protected]> Cc: <[email protected]> diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 3f7bc5c..d84b17f 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -243,7 +243,7 @@ static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) u32 reg; rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®); - return rt2x00_get_field32(reg, MAC_CSR13_BIT5); + return rt2x00_get_field32(reg, MAC_CSR13_VAL5); } #ifdef CONFIG_RT2X00_LIB_LEDS @@ -715,11 +715,11 @@ static void rt61pci_config_antenna_2529_rx(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®); - rt2x00_set_field32(®, MAC_CSR13_BIT4, p1); - rt2x00_set_field32(®, MAC_CSR13_BIT12, 0); + rt2x00_set_field32(®, MAC_CSR13_DIR4, 0); + rt2x00_set_field32(®, MAC_CSR13_VAL4, p1); - rt2x00_set_field32(®, MAC_CSR13_BIT3, !p2); - rt2x00_set_field32(®, MAC_CSR13_BIT11, 0); + rt2x00_set_field32(®, MAC_CSR13_DIR3, 0); + rt2x00_set_field32(®, MAC_CSR13_VAL3, !p2); rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg); } diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h index e3cd6db..9bc6b60 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.h +++ b/drivers/net/wireless/rt2x00/rt61pci.h @@ -357,21 +357,22 @@ struct hw_pairwise_ta_entry { /* * MAC_CSR13: GPIO. + * MAC_CSR13_VALx: GPIO value + * MAC_CSR13_DIRx: GPIO direction: 0 = output; 1 = input */ #define MAC_CSR13 0x3034 -#define MAC_CSR13_BIT0 FIELD32(0x00000001) -#define MAC_CSR13_BIT1 FIELD32(0x00000002) -#define MAC_CSR13_BIT2 FIELD32(0x00000004) -#define MAC_CSR13_BIT3 FIELD32(0x00000008) -#define MAC_CSR13_BIT4 FIELD32(0x00000010) -#define MAC_CSR13_BIT5 FIELD32(0x00000020) -#define MAC_CSR13_BIT6 FIELD32(0x00000040) -#define MAC_CSR13_BIT7 FIELD32(0x00000080) -#define MAC_CSR13_BIT8 FIELD32(0x00000100) -#define MAC_CSR13_BIT9 FIELD32(0x00000200) -#define MAC_CSR13_BIT10 FIELD32(0x00000400) -#define MAC_CSR13_BIT11 FIELD32(0x00000800) -#define MAC_CSR13_BIT12 FIELD32(0x00001000) +#define MAC_CSR13_VAL0 FIELD32(0x00000001) +#define MAC_CSR13_VAL1 FIELD32(0x00000002) +#define MAC_CSR13_VAL2 FIELD32(0x00000004) +#define MAC_CSR13_VAL3 FIELD32(0x00000008) +#define MAC_CSR13_VAL4 FIELD32(0x00000010) +#define MAC_CSR13_VAL5 FIELD32(0x00000020) +#define MAC_CSR13_DIR0 FIELD32(0x00000100) +#define MAC_CSR13_DIR1 FIELD32(0x00000200) +#define MAC_CSR13_DIR2 FIELD32(0x00000400) +#define MAC_CSR13_DIR3 FIELD32(0x00000800) +#define MAC_CSR13_DIR4 FIELD32(0x00001000) +#define MAC_CSR13_DIR5 FIELD32(0x00002000) /* * MAC_CSR14: LED control register. -- 1.7.11.1 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
