This is a note to let you know that I've just added the patch titled
serial: omap: fix software flow control
to the 3.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
serial-omap-fix-software-flow-control.patch
and it can be found in the queue-3.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <[email protected]> know about it.
>From 957ee7270d632245b43f6feb0e70d9a5e9ea6cf6 Mon Sep 17 00:00:00 2001
From: Vikram Pandita <[email protected]>
Date: Thu, 6 Sep 2012 15:45:37 +0300
Subject: serial: omap: fix software flow control
From: Vikram Pandita <[email protected]>
commit 957ee7270d632245b43f6feb0e70d9a5e9ea6cf6 upstream.
Software flow control register bits were not defined correctly.
Also clarify the IXON and IXOFF logic to reflect what userspace wants.
Tested-by: Shubhrajyoti D <[email protected]>
Signed-off-by: Vikram Pandita <[email protected]>
Signed-off-by: Shubhrajyoti D <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/plat-omap/include/plat/omap-serial.h | 4 ++--
drivers/tty/serial/omap-serial.c | 12 ++++++------
2 files changed, 8 insertions(+), 8 deletions(-)
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -42,10 +42,10 @@
#define OMAP_UART_WER_MOD_WKUP 0X7F
/* Enable XON/XOFF flow control on output */
-#define OMAP_UART_SW_TX 0x04
+#define OMAP_UART_SW_TX 0x8
/* Enable XON/XOFF flow control on input */
-#define OMAP_UART_SW_RX 0x04
+#define OMAP_UART_SW_RX 0x2
#define OMAP_UART_SYSC_RESET 0X07
#define OMAP_UART_TCR_TRIG 0X0F
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -667,19 +667,19 @@ serial_omap_configure_xonxoff
/*
* IXON Flag:
- * Enable XON/XOFF flow control on output.
- * Transmit XON1, XOFF1
+ * Flow control for OMAP.TX
+ * OMAP.RX should listen for XON/XOFF
*/
if (termios->c_iflag & IXON)
- up->efr |= OMAP_UART_SW_TX;
+ up->efr |= OMAP_UART_SW_RX;
/*
* IXOFF Flag:
- * Enable XON/XOFF flow control on input.
- * Receiver compares XON1, XOFF1.
+ * Flow control for OMAP.RX
+ * OMAP.TX should send XON/XOFF
*/
if (termios->c_iflag & IXOFF)
- up->efr |= OMAP_UART_SW_RX;
+ up->efr |= OMAP_UART_SW_TX;
serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
Patches currently in stable-queue which might be from [email protected] are
queue-3.6/serial-omap-fix-software-flow-control.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
