With the patch "serial: mxs-auart: fix the wrong RTS hardware flow control" the mainline mxs-uart driver now sets RTSEN only when hardware flow control is enabled via software. It is not possible any longer to set RTS manually via software. However, the manual modification is a valid operation. Regain the possibility to set RTS via software and only set RTSEN when hardware flow control is explicitly enabled via settermios cflag CRTSCTS.
Signed-off-by: Steffen Trumtrar <[email protected]> --- drivers/tty/serial/mxs-auart.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 6db23b0..9f63f88 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -412,10 +412,12 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) u32 ctrl = readl(u->membase + AUART_CTRL2); - ctrl &= ~AUART_CTRL2_RTSEN; + ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS); if (mctrl & TIOCM_RTS) { if (tty_port_cts_enabled(&u->state->port)) ctrl |= AUART_CTRL2_RTSEN; + else + ctrl |= AUART_CTRL2_RTS; } s->ctrl = mctrl; -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
