commit: dbccd791a3fbbdac12c33834b73beff3984988e9
From: Szymon Janc <[email protected]>
Date: Tue, 11 Dec 2012 08:51:19 +0100
Subject: Bluetooth: Fix sending HCI commands after reset
After sending reset command wait for its command complete event before
sending next command. Some chips sends CC event for command received
before reset if reset was send before chip replied with CC.
This is also required by specification that host shall not send
additional HCI commands before receiving CC for reset.
< HCI Command: Reset (0x03|0x0003) plen 0 [hci0]
18.404612
> HCI Event: Command Complete (0x0e) plen 4 [hci0]
> 18.405850
Write Extended Inquiry Response (0x03|0x0052) ncmd 1
Status: Success (0x00)
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0]
18.406079
> HCI Event: Command Complete (0x0e) plen 4 [hci0]
> 18.407864
Reset (0x03|0x0003) ncmd 1
Status: Success (0x00)
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0]
18.408062
> HCI Event: Command Complete (0x0e) plen 12 [hci0]
> 18.408835
Signed-off-by: Szymon Janc <[email protected]>
Cc: [email protected]
Acked-by: Johan Hedberg <[email protected]>
Signed-off-by: Gustavo Padovan <[email protected]>
---
net/bluetooth/hci_event.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 705078a..81b4448 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -2688,7 +2688,7 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev,
struct sk_buff *skb)
if (ev->opcode != HCI_OP_NOP)
del_timer(&hdev->cmd_timer);
- if (ev->ncmd) {
+ if (ev->ncmd && !test_bit(HCI_RESET, &hdev->flags)) {
atomic_set(&hdev->cmd_cnt, 1);
if (!skb_queue_empty(&hdev->cmd_q))
queue_work(hdev->workqueue, &hdev->cmd_work);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
