While using a mt9m001 (monochrome) camera the final output falsely gets
horizontally divided into two pictures.
The issue was git bisected to commit f410991dcf1f
| [media] i.MX27 camera: add support for YUV420 format
|
| This patch uses channel 2 of the eMMa-PrP to convert
| format provided by the sensor to YUV420.
|
| This format is very useful since it is used by the
| internal H.264 encoder.
It sets PICTURE_X_SIZE in register PRP_SRC_FRAME_SIZE to its full width
while before that commit it was divided by two:
- writel(((bytesperline >> 1) << 16) | icd->user_height,
+ writel((icd->user_width << 16) | icd->user_height,
pcdev->base_emma + PRP_SRC_FRAME_SIZE);
i.mx27 reference manual (41.6.12 PrP Source Frame Size Register) says:
PICTURE_X_SIZE. These bits set the frame width to be
processed in number of pixels. In YUV 4:2:0 mode, Cb and
Cr widths are taken as PICTURE_X_SIZE/2 pixels. In YUV
4:2:0 mode, this value should be a multiple of 8-pixels.
In other modes (RGB, YUV 4:2:2 and YUV 4:4:4) it should
be a multiple of 4 pixels.
This patch reverts to PICTURE_X_SIZE/2 for channel 1.
Tested on Kernel 3.4, merged to 3.8rc.
Signed-off-by: Christoph Fritz <[email protected]>
---
drivers/media/platform/soc_camera/mx2_camera.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/soc_camera/mx2_camera.c
b/drivers/media/platform/soc_camera/mx2_camera.c
index 8bda2c9..795bd3f 100644
--- a/drivers/media/platform/soc_camera/mx2_camera.c
+++ b/drivers/media/platform/soc_camera/mx2_camera.c
@@ -778,11 +778,11 @@ static void mx27_camera_emma_buf_init(struct
soc_camera_device *icd,
struct mx2_camera_dev *pcdev = ici->priv;
struct mx2_fmt_cfg *prp = pcdev->emma_prp;
- writel((pcdev->s_width << 16) | pcdev->s_height,
- pcdev->base_emma + PRP_SRC_FRAME_SIZE);
writel(prp->cfg.src_pixel,
pcdev->base_emma + PRP_SRC_PIXEL_FORMAT_CNTL);
if (prp->cfg.channel == 1) {
+ writel(((bytesperline >> 1) << 16) | pcdev->s_height,
+ pcdev->base_emma + PRP_SRC_FRAME_SIZE);
writel((icd->user_width << 16) | icd->user_height,
pcdev->base_emma + PRP_CH1_OUT_IMAGE_SIZE);
writel(bytesperline,
@@ -790,6 +790,8 @@ static void mx27_camera_emma_buf_init(struct
soc_camera_device *icd,
writel(prp->cfg.ch1_pixel,
pcdev->base_emma + PRP_CH1_PIXEL_FORMAT_CNTL);
} else { /* channel 2 */
+ writel((pcdev->s_width << 16) | pcdev->s_height,
+ pcdev->base_emma + PRP_SRC_FRAME_SIZE);
writel((icd->user_width << 16) | icd->user_height,
pcdev->base_emma + PRP_CH2_OUT_IMAGE_SIZE);
}
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
