commit: 77e372a3d82e5e4878ce1962207edd766773cc76 From: Sean Young <[email protected]> Date: Fri, 22 Feb 2013 16:27:19 +0000 Subject: tty/8250_pnp: serial port detection regression since v3.7
The InsydeH2O BIOS (version dated 09/12/2011) has the following in its pnp resouces for its serial ports: $ cat /sys/bus/pnp/devices/00:0b/resources state = active io disabled irq disabled We do not check if the resources are disabled, and create a bogus ttyS* device. Since commit 835d844d1a28e (8250_pnp: do pnp probe before legacy probe) we get a bogus ttyS0, which prevents the legacy probe from detecting it. Note, the BIOS can also be upgraded, fixing this problem, but for people who can't do that, this fix is needed. Reported-by: Vincent Deffontaines <[email protected]> Tested-by: Vincent Deffontaines <[email protected]> Signed-off-by: Sean Young <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> --- drivers/tty/serial/8250/8250_pnp.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c index 35d9ab9..b3455a9 100644 --- a/drivers/tty/serial/8250/8250_pnp.c +++ b/drivers/tty/serial/8250/8250_pnp.c @@ -429,6 +429,7 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) { struct uart_8250_port uart; int ret, line, flags = dev_id->driver_data; + struct resource *res = NULL; if (flags & UNKNOWN_DEV) { ret = serial_pnp_guess_board(dev); @@ -439,11 +440,12 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) memset(&uart, 0, sizeof(uart)); if (pnp_irq_valid(dev, 0)) uart.port.irq = pnp_irq(dev, 0); - if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) { - uart.port.iobase = pnp_port_start(dev, 2); - uart.port.iotype = UPIO_PORT; - } else if (pnp_port_valid(dev, 0)) { - uart.port.iobase = pnp_port_start(dev, 0); + if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) + res = pnp_get_resource(dev, IORESOURCE_IO, 2); + else if (pnp_port_valid(dev, 0)) + res = pnp_get_resource(dev, IORESOURCE_IO, 0); + if (pnp_resource_enabled(res)) { + uart.port.iobase = res->start; uart.port.iotype = UPIO_PORT; } else if (pnp_mem_valid(dev, 0)) { uart.port.mapbase = pnp_mem_start(dev, 0); -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
