This is a note to let you know that I've just added the patch titled
tty/8250_pnp: serial port detection regression since v3.7
to the 3.8-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
tty-8250_pnp-serial-port-detection-regression-since-v3.7.patch
and it can be found in the queue-3.8 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <[email protected]> know about it.
>From 77e372a3d82e5e4878ce1962207edd766773cc76 Mon Sep 17 00:00:00 2001
From: Sean Young <[email protected]>
Date: Fri, 22 Feb 2013 16:27:19 +0000
Subject: tty/8250_pnp: serial port detection regression since v3.7
From: Sean Young <[email protected]>
commit 77e372a3d82e5e4878ce1962207edd766773cc76 upstream.
The InsydeH2O BIOS (version dated 09/12/2011) has the following in
its pnp resouces for its serial ports:
$ cat /sys/bus/pnp/devices/00:0b/resources
state = active
io disabled
irq disabled
We do not check if the resources are disabled, and create a bogus
ttyS* device. Since commit 835d844d1a28e (8250_pnp: do pnp probe
before legacy probe) we get a bogus ttyS0, which prevents the legacy
probe from detecting it.
Note, the BIOS can also be upgraded, fixing this problem, but for people
who can't do that, this fix is needed.
Reported-by: Vincent Deffontaines <[email protected]>
Tested-by: Vincent Deffontaines <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250_pnp.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -429,6 +429,7 @@ serial_pnp_probe(struct pnp_dev *dev, co
{
struct uart_8250_port uart;
int ret, line, flags = dev_id->driver_data;
+ struct resource *res = NULL;
if (flags & UNKNOWN_DEV) {
ret = serial_pnp_guess_board(dev);
@@ -439,11 +440,12 @@ serial_pnp_probe(struct pnp_dev *dev, co
memset(&uart, 0, sizeof(uart));
if (pnp_irq_valid(dev, 0))
uart.port.irq = pnp_irq(dev, 0);
- if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) {
- uart.port.iobase = pnp_port_start(dev, 2);
- uart.port.iotype = UPIO_PORT;
- } else if (pnp_port_valid(dev, 0)) {
- uart.port.iobase = pnp_port_start(dev, 0);
+ if ((flags & CIR_PORT) && pnp_port_valid(dev, 2))
+ res = pnp_get_resource(dev, IORESOURCE_IO, 2);
+ else if (pnp_port_valid(dev, 0))
+ res = pnp_get_resource(dev, IORESOURCE_IO, 0);
+ if (pnp_resource_enabled(res)) {
+ uart.port.iobase = res->start;
uart.port.iotype = UPIO_PORT;
} else if (pnp_mem_valid(dev, 0)) {
uart.port.mapbase = pnp_mem_start(dev, 0);
Patches currently in stable-queue which might be from [email protected] are
queue-3.8/tty-8250_pnp-serial-port-detection-regression-since-v3.7.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
