This is a note to let you know that I've just added the patch titled
ARM: w1-gpio: fix erroneous gpio requests
to the 3.8-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-w1-gpio-fix-erroneous-gpio-requests.patch
and it can be found in the queue-3.8 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <[email protected]> know about it.
>From 2d798a3f20ae992b0b69a2b68c04ada397c32ed4 Mon Sep 17 00:00:00 2001
From: Johan Hovold <[email protected]>
Date: Tue, 12 Mar 2013 20:21:34 +0100
Subject: ARM: w1-gpio: fix erroneous gpio requests
From: Johan Hovold <[email protected]>
commit 2d798a3f20ae992b0b69a2b68c04ada397c32ed4 upstream.
Fix regression introduced by commit d2323cf773 ("onewire: w1-gpio: add
ext_pullup_enable pin in platform data") which added a gpio entry to the
platform data, but did not add the required initialisers to the board
files using it. Consequently, the driver would request gpio 0 at probe,
which could break other uses of the corresponding pin.
On AT91 requesting gpio 0 changes the pin muxing for PIOA0, which, for
instance, breaks SPI0 on at91sam9g20.
Signed-off-by: Johan Hovold <[email protected]>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mach-at91/board-foxg20.c | 1 +
arch/arm/mach-at91/board-stamp9g20.c | 1 +
arch/arm/mach-ixp4xx/vulcan-setup.c | 1 +
arch/arm/mach-pxa/raumfeld.c | 1 +
4 files changed, 4 insertions(+)
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -176,6 +176,7 @@ static struct w1_gpio_platform_data w1_g
/* If you choose to use a pin other than PB16 it needs to be 3.3V */
.pin = AT91_PIN_PB16,
.is_open_drain = 1,
+ .ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device w1_device = {
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -188,6 +188,7 @@ static struct spi_board_info portuxg20_s
static struct w1_gpio_platform_data w1_gpio_pdata = {
.pin = AT91_PIN_PA29,
.is_open_drain = 1,
+ .ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device w1_device = {
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -163,6 +163,7 @@ static struct platform_device vulcan_max
static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = {
.pin = 14,
+ .ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device vulcan_w1_gpio = {
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -505,6 +505,7 @@ static struct w1_gpio_platform_data w1_g
.pin = GPIO_ONE_WIRE,
.is_open_drain = 0,
.enable_external_pullup = w1_enable_external_pullup,
+ .ext_pullup_enable_pin = -EINVAL,
};
struct platform_device raumfeld_w1_gpio_device = {
Patches currently in stable-queue which might be from [email protected] are
queue-3.8/arm-w1-gpio-fix-erroneous-gpio-requests.patch
queue-3.8/w1-gpio-remove-erroneous-__exit-and-__exit_p.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
