This is a note to let you know that I've just added the patch titled
USB: xhci: correctly enable interrupts
to the 3.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
usb-xhci-correctly-enable-interrupts.patch
and it can be found in the queue-3.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <[email protected]> know about it.
>From 00eed9c814cb8f281be6f0f5d8f45025dc0a97eb Mon Sep 17 00:00:00 2001
From: Hannes Reinecke <[email protected]>
Date: Mon, 4 Mar 2013 17:14:43 +0100
Subject: USB: xhci: correctly enable interrupts
From: Hannes Reinecke <[email protected]>
commit 00eed9c814cb8f281be6f0f5d8f45025dc0a97eb upstream.
xhci has its own interrupt enabling routine, which will try to
use MSI-X/MSI if present. So the usb core shouldn't try to enable
legacy interrupts; on some machines the xhci legacy IRQ setting
is invalid.
v3: Be careful to not break XHCI_BROKEN_MSI workaround (by trenn)
Cc: Bjorn Helgaas <[email protected]>
Cc: Oliver Neukum <[email protected]>
Cc: Thomas Renninger <[email protected]>
Cc: Yinghai Lu <[email protected]>
Cc: Frederik Himpe <[email protected]>
Cc: David Haerdeman <[email protected]>
Cc: Alan Stern <[email protected]>
Acked-by: Sarah Sharp <[email protected]>
Reviewed-by: Thomas Renninger <[email protected]>
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/hcd-pci.c | 23 ++++++++++++++---------
drivers/usb/host/xhci.c | 3 ++-
2 files changed, 16 insertions(+), 10 deletions(-)
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -173,6 +173,7 @@ int usb_hcd_pci_probe(struct pci_dev *de
struct hc_driver *driver;
struct usb_hcd *hcd;
int retval;
+ int hcd_irq = 0;
if (usb_disabled())
return -ENODEV;
@@ -187,15 +188,19 @@ int usb_hcd_pci_probe(struct pci_dev *de
return -ENODEV;
dev->current_state = PCI_D0;
- /* The xHCI driver supports MSI and MSI-X,
- * so don't fail if the BIOS doesn't provide a legacy IRQ.
+ /*
+ * The xHCI driver has its own irq management
+ * make sure irq setup is not touched for xhci in generic hcd code
*/
- if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
- dev_err(&dev->dev,
- "Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
- pci_name(dev));
- retval = -ENODEV;
- goto disable_pci;
+ if ((driver->flags & HCD_MASK) != HCD_USB3) {
+ if (!dev->irq) {
+ dev_err(&dev->dev,
+ "Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
+ pci_name(dev));
+ retval = -ENODEV;
+ goto disable_pci;
+ }
+ hcd_irq = dev->irq;
}
hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
@@ -245,7 +250,7 @@ int usb_hcd_pci_probe(struct pci_dev *de
pci_set_master(dev);
- retval = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
+ retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
if (retval != 0)
goto unmap_registers;
set_hs_companion(dev, hcd);
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -350,7 +350,7 @@ static int xhci_try_enable_msi(struct us
* generate interrupts. Don't even try to enable MSI.
*/
if (xhci->quirks & XHCI_BROKEN_MSI)
- return 0;
+ goto legacy_irq;
/* unregister the legacy interrupt */
if (hcd->irq)
@@ -371,6 +371,7 @@ static int xhci_try_enable_msi(struct us
return -EINVAL;
}
+ legacy_irq:
/* fall back to legacy interrupt*/
ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
hcd->irq_descr, hcd);
Patches currently in stable-queue which might be from [email protected] are
queue-3.4/usb-xhci-correctly-enable-interrupts.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
