From: Sujith Manoharan <[email protected]> For AR9485 boards with XLNA, the default gpio config is not set correctly, fix this.
Cc: [email protected] Signed-off-by: Sujith Manoharan <[email protected]> --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 8 ++++++-- drivers/net/wireless/ath/ath9k/ar9003_phy.h | 2 ++ 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index e6b92ff..25b8bbb 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -3563,14 +3563,18 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz) { struct ath9k_hw_capabilities *pCap = &ah->caps; int chain; - u32 regval; + u32 regval, value; static const u32 switch_chain_reg[AR9300_MAX_CHAINS] = { AR_PHY_SWITCH_CHAIN_0, AR_PHY_SWITCH_CHAIN_1, AR_PHY_SWITCH_CHAIN_2, }; - u32 value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz); + if (AR_SREV_9485(ah) && (ar9003_hw_get_rx_gain_idx(ah) == 0)) + ath9k_hw_cfg_output(ah, AR9300_EXT_LNA_CTL_GPIO_AR9485, + AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED); + + value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz); if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) { REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM, diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h index e717741..5013c73 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -351,6 +351,8 @@ #define AR_PHY_CCA_NOM_VAL_9330_2GHZ -118 +#define AR9300_EXT_LNA_CTL_GPIO_AR9485 9 + /* * AGC Field Definitions */ -- 1.8.3 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
