Am Sonntag, den 21.07.2013, 10:34 +0800 schrieb Richard Zhao: > The errors were caused by copy/paste mistake in below commit > since v3.10: > 3489d50 ASoC: tegra: Use common DAI DMA data struct > > It also corrects slave_id initialization in tegra20_ac97 driver. > > Signed-off-by: Richard Zhao <[email protected]> > Cc: Lars-Peter Clausen <[email protected]> > Cc: <[email protected]> # 3.10
Acked-by: Lucas Stach <[email protected]> > --- > sound/soc/tegra/tegra20_ac97.c | 6 +++--- > sound/soc/tegra/tegra20_spdif.c | 4 ++-- > 2 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/sound/soc/tegra/tegra20_ac97.c b/sound/soc/tegra/tegra20_ac97.c > index e58233f..6c48662 100644 > --- a/sound/soc/tegra/tegra20_ac97.c > +++ b/sound/soc/tegra/tegra20_ac97.c > @@ -389,9 +389,9 @@ static int tegra20_ac97_platform_probe(struct > platform_device *pdev) > ac97->capture_dma_data.slave_id = of_dma[1]; > > ac97->playback_dma_data.addr = mem->start + TEGRA20_AC97_FIFO_TX1; > - ac97->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > - ac97->capture_dma_data.maxburst = 4; > - ac97->capture_dma_data.slave_id = of_dma[0]; > + ac97->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > + ac97->playback_dma_data.maxburst = 4; > + ac97->playback_dma_data.slave_id = of_dma[1]; > > ret = tegra_asoc_utils_init(&ac97->util_data, &pdev->dev); > if (ret) > diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c > index 5eaa12c..551b3c9 100644 > --- a/sound/soc/tegra/tegra20_spdif.c > +++ b/sound/soc/tegra/tegra20_spdif.c > @@ -323,8 +323,8 @@ static int tegra20_spdif_platform_probe(struct > platform_device *pdev) > } > > spdif->playback_dma_data.addr = mem->start + TEGRA20_SPDIF_DATA_OUT; > - spdif->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > - spdif->capture_dma_data.maxburst = 4; > + spdif->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > + spdif->playback_dma_data.maxburst = 4; > spdif->playback_dma_data.slave_id = dmareq->start; > > pm_runtime_enable(&pdev->dev); -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
