This is a note to let you know that I've just added the patch titled
USB: mos7840: fix memory leak in open
to the 3.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
usb-mos7840-fix-memory-leak-in-open.patch
and it can be found in the queue-3.10 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <[email protected]> know about it.
>From 5f8a2e68b679b41cc8e9b642f2f5aa45dd678641 Mon Sep 17 00:00:00 2001
From: Johan Hovold <[email protected]>
Date: Mon, 1 Jul 2013 14:03:33 +0200
Subject: USB: mos7840: fix memory leak in open
From: Johan Hovold <[email protected]>
commit 5f8a2e68b679b41cc8e9b642f2f5aa45dd678641 upstream.
Allocated urbs and buffers were never freed on errors in open.
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/mos7840.c | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -914,20 +914,20 @@ static int mos7840_open(struct tty_struc
status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
if (status < 0) {
dev_dbg(&port->dev, "Reading Spreg failed\n");
- return -1;
+ goto err;
}
Data |= 0x80;
status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
if (status < 0) {
dev_dbg(&port->dev, "writing Spreg failed\n");
- return -1;
+ goto err;
}
Data &= ~0x80;
status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
if (status < 0) {
dev_dbg(&port->dev, "writing Spreg failed\n");
- return -1;
+ goto err;
}
/* End of block to be checked */
@@ -936,7 +936,7 @@ static int mos7840_open(struct tty_struc
&Data);
if (status < 0) {
dev_dbg(&port->dev, "Reading Controlreg failed\n");
- return -1;
+ goto err;
}
Data |= 0x08; /* Driver done bit */
Data |= 0x20; /* rx_disable */
@@ -944,7 +944,7 @@ static int mos7840_open(struct tty_struc
mos7840_port->ControlRegOffset, Data);
if (status < 0) {
dev_dbg(&port->dev, "writing Controlreg failed\n");
- return -1;
+ goto err;
}
/* do register settings here */
/* Set all regs to the device default values. */
@@ -955,21 +955,21 @@ static int mos7840_open(struct tty_struc
status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
if (status < 0) {
dev_dbg(&port->dev, "disabling interrupts failed\n");
- return -1;
+ goto err;
}
/* Set FIFO_CONTROL_REGISTER to the default value */
Data = 0x00;
status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
if (status < 0) {
dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n");
- return -1;
+ goto err;
}
Data = 0xcf;
status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
if (status < 0) {
dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n");
- return -1;
+ goto err;
}
Data = 0x03;
@@ -1114,6 +1114,15 @@ static int mos7840_open(struct tty_struc
/* mos7840_change_port_settings(mos7840_port,old_termios); */
return 0;
+err:
+ for (j = 0; j < NUM_URBS; ++j) {
+ urb = mos7840_port->write_urb_pool[j];
+ if (!urb)
+ continue;
+ kfree(urb->transfer_buffer);
+ usb_free_urb(urb);
+ }
+ return status;
}
/*****************************************************************************
Patches currently in stable-queue which might be from [email protected] are
queue-3.10/usb-mos7840-fix-memory-leak-in-open.patch
queue-3.10/usb-ti_usb_3410_5052-fix-dynamic-id-matching.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
