On Tue, Feb 04, 2014 at 02:34:22AM +0100, [email protected] wrote:
> 
> This is a note to let you know that I've just added the patch titled
> 
>     ata: sata_mv: fix disk hotplug for Armada 370/XP SoCs
> 
> to the 3.4-stable tree which can be found at:
>     
> http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
> 
> The filename of the patch is:
>      ata-sata_mv-fix-disk-hotplug-for-armada-370-xp-socs.patch
> and it can be found in the queue-3.4 subdirectory.
> 
> If you, or anyone else, feels it should not be added to the stable tree,
> please let <[email protected]> know about it.
> 
> 
> >From 9013d64e661fc2a37a1742670202171c27fef4b5 Mon Sep 17 00:00:00 2001
> From: Lior Amsalem <[email protected]>
> Date: Tue, 14 Jan 2014 20:09:57 +0100
> Subject: ata: sata_mv: fix disk hotplug for Armada 370/XP SoCs
> 
> From: Lior Amsalem <[email protected]>
> 
> commit 9013d64e661fc2a37a1742670202171c27fef4b5 upstream.
> 
> On Armada 370/XP SoCs, once a disk is removed from a SATA port, then the
> re-plug events are not detected by the sata_mv driver. This patch fixes
> the issue by updating the PHY speed in the LP_PHY_CTL register (0x58)
> according to the SControl speed.
> 
> Note that this fix is only applied if the compatible string
> "marvell,armada-370-sata" is found in the SATA DT node.
> 
> Fixes: 9ae6f740b49f ("arm: mach-mvebu: add support for Armada 370 and Armada 
> XP with DT")

Hi Greg,

As the Armada 370 and XP SoCs are not supported by Linux 3.4, I think
you should not apply this patch to the 3.4-stable tree.

Please, let me know if there is something wrong the "Fixes:" notation
above. I'd try to improve for the next time.

Regards,

Simon

> Signed-off-by: Lior Amsalem <[email protected]>
> Signed-off-by: Nadav Haklai <[email protected]>
> Signed-off-by: Simon Guinot <[email protected]>
> Cc: Thomas Petazzoni <[email protected]>
> Cc: Jason Cooper <[email protected]>
> Cc: Andrew Lunn <[email protected]>
> Cc: Gregory Clement <[email protected]>
> Cc: Sebastian Hesselbarth <[email protected]>
> Acked-by: Jason Cooper <[email protected]>
> Signed-off-by: Tejun Heo <[email protected]>
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
> 
> ---
>  drivers/ata/sata_mv.c |   24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> --- a/drivers/ata/sata_mv.c
> +++ b/drivers/ata/sata_mv.c
> @@ -302,6 +302,7 @@ enum {
>       MV5_LTMODE              = 0x30,
>       MV5_PHY_CTL             = 0x0C,
>       SATA_IFCFG              = 0x050,
> +     LP_PHY_CTL              = 0x058,
>  
>       MV_M2_PREAMP_MASK       = 0x7e0,
>  
> @@ -429,6 +430,7 @@ enum {
>       MV_HP_CUT_THROUGH       = (1 << 10),    /* can use EDMA cut-through */
>       MV_HP_FLAG_SOC          = (1 << 11),    /* SystemOnChip, no PCI */
>       MV_HP_QUIRK_LED_BLINK_EN = (1 << 12),   /* is led blinking enabled? */
> +     MV_HP_FIX_LP_PHY_CTL    = (1 << 13),    /* fix speed in LP_PHY_CTL ? */
>  
>       /* Port private flags (pp_flags) */
>       MV_PP_FLAG_EDMA_EN      = (1 << 0),     /* is EDMA engine enabled? */
> @@ -1348,6 +1350,7 @@ static int mv_scr_write(struct ata_link
>  
>       if (ofs != 0xffffffffU) {
>               void __iomem *addr = mv_ap_base(link->ap) + ofs;
> +             struct mv_host_priv *hpriv = link->ap->host->private_data;
>               if (sc_reg_in == SCR_CONTROL) {
>                       /*
>                        * Workaround for 88SX60x1 FEr SATA#26:
> @@ -1364,6 +1367,18 @@ static int mv_scr_write(struct ata_link
>                        */
>                       if ((val & 0xf) == 1 || (readl(addr) & 0xf) == 1)
>                               val |= 0xf000;
> +
> +                     if (hpriv->hp_flags & MV_HP_FIX_LP_PHY_CTL) {
> +                             void __iomem *lp_phy_addr =
> +                                     mv_ap_base(link->ap) + LP_PHY_CTL;
> +                             /*
> +                              * Set PHY speed according to SControl speed.
> +                              */
> +                             if ((val & 0xf0) == 0x10)
> +                                     writelfl(0x7, lp_phy_addr);
> +                             else
> +                                     writelfl(0x227, lp_phy_addr);
> +                     }
>               }
>               writelfl(val, addr);
>               return 0;
> @@ -4082,6 +4097,15 @@ static int mv_platform_probe(struct plat
>       if (rc)
>               goto err;
>  
> +     /*
> +      * To allow disk hotplug on Armada 370/XP SoCs, the PHY speed must be
> +      * updated in the LP_PHY_CTL register.
> +      */
> +     if (pdev->dev.of_node &&
> +             of_device_is_compatible(pdev->dev.of_node,
> +                                     "marvell,armada-370-sata"))
> +             hpriv->hp_flags |= MV_HP_FIX_LP_PHY_CTL;
> +
>       /* initialize adapter */
>       rc = mv_init_host(host);
>       if (rc)
> 
> 
> Patches currently in stable-queue which might be from [email protected] are
> 
> queue-3.4/ata-sata_mv-fix-disk-hotplug-for-armada-370-xp-socs.patch

Attachment: signature.asc
Description: Digital signature

Reply via email to