This is a note to let you know that I've just added the patch titled
tg3: Add New 5719 Read DMA workaround
to the 3.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
tg3-add-new-5719-read-dma-workaround.patch
and it can be found in the queue-3.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <[email protected]> know about it.
>From 638030fe4b54431ac8deadecfd54b435336c0c69 Mon Sep 17 00:00:00 2001
From: Michael Chan <[email protected]>
Date: Sun, 29 Jul 2012 19:15:43 +0000
Subject: tg3: Add New 5719 Read DMA workaround
From: Michael Chan <[email protected]>
commit 091f0ea30074bc43f9250961b3247af713024bc6 upstream.
After Power-on-reset, the 5719's TX DMA length registers may contain
uninitialized values and cause TX DMA to stall. Check for invalid
values and set a register bit to flush the TX channels. The bit
needs to be turned off after the DMA channels have been flushed.
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Cc: Qiang Huang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/tg3.c | 23 +++++++++++++++++++++++
drivers/net/ethernet/broadcom/tg3.h | 7 ++++++-
2 files changed, 29 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -9161,6 +9161,19 @@ static int tg3_reset_hw(struct tg3 *tp,
tw32_f(RDMAC_MODE, rdmac_mode);
udelay(40);
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) {
+ for (i = 0; i < TG3_NUM_RDMA_CHANNELS; i++) {
+ if (tr32(TG3_RDMA_LENGTH + (i << 2)) > TG3_MAX_MTU(tp))
+ break;
+ }
+ if (i < TG3_NUM_RDMA_CHANNELS) {
+ val = tr32(TG3_LSO_RD_DMA_CRPTEN_CTRL);
+ val |= TG3_LSO_RD_DMA_TX_LENGTH_WA;
+ tw32(TG3_LSO_RD_DMA_CRPTEN_CTRL, val);
+ tg3_flag_set(tp, 5719_RDMA_BUG);
+ }
+ }
+
tw32(RCVDCC_MODE, RCVDCC_MODE_ENABLE | RCVDCC_MODE_ATTN_ENABLE);
if (!tg3_flag(tp, 5705_PLUS))
tw32(MBFREE_MODE, MBFREE_MODE_ENABLE);
@@ -9416,6 +9429,16 @@ static void tg3_periodic_fetch_stats(str
TG3_STAT_ADD32(&sp->tx_ucast_packets, MAC_TX_STATS_UCAST);
TG3_STAT_ADD32(&sp->tx_mcast_packets, MAC_TX_STATS_MCAST);
TG3_STAT_ADD32(&sp->tx_bcast_packets, MAC_TX_STATS_BCAST);
+ if (unlikely(tg3_flag(tp, 5719_RDMA_BUG) &&
+ (sp->tx_ucast_packets.low + sp->tx_mcast_packets.low +
+ sp->tx_bcast_packets.low) > TG3_NUM_RDMA_CHANNELS)) {
+ u32 val;
+
+ val = tr32(TG3_LSO_RD_DMA_CRPTEN_CTRL);
+ val &= ~TG3_LSO_RD_DMA_TX_LENGTH_WA;
+ tw32(TG3_LSO_RD_DMA_CRPTEN_CTRL, val);
+ tg3_flag_clear(tp, 5719_RDMA_BUG);
+ }
TG3_STAT_ADD32(&sp->rx_octets, MAC_RX_STATS_OCTETS);
TG3_STAT_ADD32(&sp->rx_fragments, MAC_RX_STATS_FRAGMENTS);
--- a/drivers/net/ethernet/broadcom/tg3.h
+++ b/drivers/net/ethernet/broadcom/tg3.h
@@ -1376,7 +1376,11 @@
#define TG3_LSO_RD_DMA_CRPTEN_CTRL 0x00004910
#define TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_BD_4K 0x00030000
#define TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_LSO_4K 0x000c0000
-/* 0x4914 --> 0x4c00 unused */
+#define TG3_LSO_RD_DMA_TX_LENGTH_WA 0x02000000
+/* 0x4914 --> 0x4be0 unused */
+
+#define TG3_NUM_RDMA_CHANNELS 4
+#define TG3_RDMA_LENGTH 0x00004be0
/* Write DMA control registers */
#define WDMAC_MODE 0x00004c00
@@ -2924,6 +2928,7 @@ enum TG3_FLAGS {
TG3_FLAG_L1PLLPD_EN,
TG3_FLAG_APE_HAS_NCSI,
TG3_FLAG_4K_FIFO_LIMIT,
+ TG3_FLAG_5719_RDMA_BUG,
TG3_FLAG_RESET_TASK_PENDING,
TG3_FLAG_5705_PLUS,
TG3_FLAG_IS_5788,
Patches currently in stable-queue which might be from [email protected] are
queue-3.4/tg3-wait-for-boot-code-to-finish-after-power-on.patch
queue-3.4/tg3-add-new-5719-read-dma-workaround.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
