This is a note to let you know that I've just added the patch titled
usb: chipidea: coordinate usb phy initialization for different phy
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From cd84f009e98b3aa6109503f80f66ccf3e19e8fa9 Mon Sep 17 00:00:00 2001
From: Peter Chen <[email protected]>
Date: Thu, 24 Apr 2014 08:15:27 +0800
Subject: usb: chipidea: coordinate usb phy initialization for different phy
type
For internal PHY (like UTMI), the phy clock may from internal pll,
it is on/off on the fly, the access PORTSC.PTS will hang without
phy clock. So, the usb_phy_init which will open phy clock needs to
be called before hw_phymode_configure.
See: http://marc.info/?l=linux-arm-kernel&m=139350618732108&w=2
For external PHY (like ulpi), it needs to configure portsc.pts before
visit viewport, or the viewport can't be visited. so phy_phymode_configure
needs to be called before usb_phy_init.
See: cd0b42c2a6d2a74244f0053f8960f5dad5842278
It may not the best solution, but it can work for all situations.
Cc: Sascha Hauer <[email protected]>
Cc: Chris Ruehl <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: stable <[email protected]> # 3.14
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/chipidea/core.c | 37 ++++++++++++++++++++++++++++++++++---
1 file changed, 34 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index ca6831c5b763..1cd5d0ba587c 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -277,6 +277,39 @@ static void hw_phymode_configure(struct ci_hdrc *ci)
}
/**
+ * ci_usb_phy_init: initialize phy according to different phy type
+ * @ci: the controller
+ *
+ * This function returns an error code if usb_phy_init has failed
+ */
+static int ci_usb_phy_init(struct ci_hdrc *ci)
+{
+ int ret;
+
+ switch (ci->platdata->phy_mode) {
+ case USBPHY_INTERFACE_MODE_UTMI:
+ case USBPHY_INTERFACE_MODE_UTMIW:
+ case USBPHY_INTERFACE_MODE_HSIC:
+ ret = usb_phy_init(ci->transceiver);
+ if (ret)
+ return ret;
+ hw_phymode_configure(ci);
+ break;
+ case USBPHY_INTERFACE_MODE_ULPI:
+ case USBPHY_INTERFACE_MODE_SERIAL:
+ hw_phymode_configure(ci);
+ ret = usb_phy_init(ci->transceiver);
+ if (ret)
+ return ret;
+ break;
+ default:
+ ret = usb_phy_init(ci->transceiver);
+ }
+
+ return ret;
+}
+
+/**
* hw_device_reset: resets chip (execute without interruption)
* @ci: the controller
*
@@ -543,8 +576,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)
return -ENODEV;
}
- hw_phymode_configure(ci);
-
if (ci->platdata->phy)
ci->transceiver = ci->platdata->phy;
else
@@ -564,7 +595,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
return -EPROBE_DEFER;
}
- ret = usb_phy_init(ci->transceiver);
+ ret = ci_usb_phy_init(ci);
if (ret) {
dev_err(dev, "unable to init phy: %d\n", ret);
return ret;
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
