On 2014年08月18日 16:59, Takashi Iwai wrote:
At Mon, 18 Aug 2014 15:25:19 +0800,
Hui Wang wrote:
On some HP laptops, the mute led is controlled by codec gpio.
When some machine resume from s3/s4, the codec gpio data will be
cleared to 0 by BIOS:
Before suspend:
IO[3]: enable=1, dir=1, wake=0, sticky=0, data=1, unsol=0
After resume:
IO[3]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0
To skip the AFG node to enter S3 can't fix this problem.
A workaround is to restore the gpio data when the system resume
back from s3/s4. It is safe even on the machines without this
problem.
BugLink: https://bugs.launchpad.net/bugs/1358116
Tested-by: Franz Hsieh <[email protected]>
Cc: [email protected]
Signed-off-by: Hui Wang <[email protected]>
---
sound/pci/hda/patch_realtek.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index b32ce08..9c49bf5 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3432,6 +3432,12 @@ static unsigned int led_power_filter(struct hda_codec
*codec,
(nid != spec->mute_led_nid && nid != spec->cap_mute_led_nid))
return power_state;
+ if (nid == codec->afg && power_state == AC_PWRST_D0 && spec->gpio_led) {
+ snd_hda_codec_write(codec, codec->afg, 0, AC_VERB_SET_GPIO_DATA,
+ spec->gpio_led);
+ return power_state;
In general, the power filter is a wrong place to put such a verb
write. This is called *before* powering up the codec NID.
Understand now.
Yes, I see the pinctl is handled in the code below, and I don't like
this either. The codec write verb should be at best in the resume
callback after power up.
OK, got it.
Thanks,
Hui.
Takashi
+ }
+
/* Set pin ctl again, it might have just been set to 0 */
snd_hda_set_pin_ctl(codec, nid,
snd_hda_codec_get_pin_target(codec, nid));
--
1.9.1
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
