This is a note to let you know that I've just added the patch titled
tty/serial: at91: BUG: disable interrupts when !UART_ENABLE_MS()
to my tty git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
in the tty-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From 35b675b9100fc38f58cb75b30e422ecd342519a8 Mon Sep 17 00:00:00 2001
From: Richard Genoud <[email protected]>
Date: Wed, 3 Sep 2014 18:09:26 +0200
Subject: tty/serial: at91: BUG: disable interrupts when !UART_ENABLE_MS()
In set_termios(), interrupts where not disabled if UART_ENABLE_MS() was
false.
Tested on at91sam9g35.
Signed-off-by: Richard Genoud <[email protected]>
Cc: stable <[email protected]> # >= 3.16
Reviewed-by: Peter Hurley <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/atmel_serial.c | 43 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 42 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/atmel_serial.c
b/drivers/tty/serial/atmel_serial.c
index 7b63677475c1..d7d4584549a5 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -527,6 +527,45 @@ static void atmel_enable_ms(struct uart_port *port)
}
/*
+ * Disable modem status interrupts
+ */
+static void atmel_disable_ms(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ uint32_t idr = 0;
+
+ /*
+ * Interrupt should not be disabled twice
+ */
+ if (!atmel_port->ms_irq_enabled)
+ return;
+
+ atmel_port->ms_irq_enabled = false;
+
+ if (atmel_port->gpio_irq[UART_GPIO_CTS] >= 0)
+ disable_irq(atmel_port->gpio_irq[UART_GPIO_CTS]);
+ else
+ idr |= ATMEL_US_CTSIC;
+
+ if (atmel_port->gpio_irq[UART_GPIO_DSR] >= 0)
+ disable_irq(atmel_port->gpio_irq[UART_GPIO_DSR]);
+ else
+ idr |= ATMEL_US_DSRIC;
+
+ if (atmel_port->gpio_irq[UART_GPIO_RI] >= 0)
+ disable_irq(atmel_port->gpio_irq[UART_GPIO_RI]);
+ else
+ idr |= ATMEL_US_RIIC;
+
+ if (atmel_port->gpio_irq[UART_GPIO_DCD] >= 0)
+ disable_irq(atmel_port->gpio_irq[UART_GPIO_DCD]);
+ else
+ idr |= ATMEL_US_DCDIC;
+
+ UART_PUT_IDR(port, idr);
+}
+
+/*
* Control the transmission of a break signal
*/
static void atmel_break_ctl(struct uart_port *port, int break_state)
@@ -1993,7 +2032,9 @@ static void atmel_set_termios(struct uart_port *port,
struct ktermios *termios,
/* CTS flow-control and modem-status interrupts */
if (UART_ENABLE_MS(port, termios->c_cflag))
- port->ops->enable_ms(port);
+ atmel_enable_ms(port);
+ else
+ atmel_disable_ms(port);
spin_unlock_irqrestore(&port->lock, flags);
}
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
