On Thursday 11 September 2014 15:56:56 Shawn Guo wrote:
> From: Markus Niebel <[email protected]>
>
> using LVDS channel 1 on an i.MX53 leads to following error:
>
> imx-ldb 53fa8008.ldb: unable to set di0 parent clock to ldb_di1
>
> This comes from imx_ldb_set_clock with mux = 0. Mux parameter must be "1" for
> reparenting di1 clock to ldb_di1. The value of the mux param comes from device
> tree port settings.
>
> On i.MX5, the internal two-input-multiplexer is used. Due to hardware
> limitations,
> only one port (port@[0,1]) can be used for each channel (lvds-channel@[0,1],
> respectively)
>
> Documentation update suggested by Philipp Zabel <[email protected]>
>
> Signed-off-by: Markus Niebel <[email protected]>
> Fixes: e05c8c9a790a ("ARM: dts: imx53: Add IPU DI ports and endpoints, move
> imx-drm node to dtsi")
> Cc: <[email protected]>
> Acked-by: Philipp Zabel <[email protected]>
> Signed-off-by: Shawn Guo <[email protected]>
> ---
> Hi arm-soc folks,
>
> Please apply the fix for 3.17, thanks.
Applied to fixes branch, thanks!
Arnd
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
