So that's just over 6 kW if phase and voltage align, which in an
application like this, they're most likely not going to do most of the time.
The interesting bit in the photo are the large air intakes / outlets,
which point at the presence of some sort of cooler / aircon unit at the
base of the radome. Transmitter heat removal and/or receiver cooling (to
keep the noise floor down)?
On 14/11/2023 5:57 pm, J Pan via Starlink wrote:
rated power consumption for all components at peak
https://files.tecnoblog.net/wp-content/uploads/2021/05/starlink-gateway-v3-selo-anatel-700x898.png
<https://files.tecnoblog.net/wp-content/uploads/2021/05/starlink-gateway-v3-selo-anatel-700x898.png>
--
J Pan, UVic CSc, ECS566, 250-472-5796 (NO VM), [email protected],
Web.UVic.CA/~pan
<http://Web.UVic.CA/~pan>
On Mon, Nov 13, 2023 at 12:42 PM Inemesit Affia via Starlink
<[email protected]> wrote:
>
> I don't know why that number didn't trip my antenna.
> _______________________________________________
> Starlink mailing list
> [email protected]
> https://lists.bufferbloat.net/listinfo/starlink
<https://lists.bufferbloat.net/listinfo/starlink>
_______________________________________________
Starlink mailing list
[email protected]
https://lists.bufferbloat.net/listinfo/starlink
<https://lists.bufferbloat.net/listinfo/starlink>
--
****************************************************************
Dr. Ulrich Speidel
School of Computer Science
Room 303S.594 (City Campus)
The University of Auckland
[email protected]
http://www.cs.auckland.ac.nz/~ulrich/
****************************************************************
_______________________________________________
Starlink mailing list
[email protected]
https://lists.bufferbloat.net/listinfo/starlink
