Le 29/01/05 16:43, [EMAIL PROTECTED] <[EMAIL PROTECTED]> a écrit :
> Good Morning everyone,
>
> I recently purchased two sticks of 64mb 60ns EDO ECC RAM off of eBay, for
> using in my Starmax. These sticks are Dell pulls, using Micron chips, and
> are in excellent condition. When I install them into my Starmax however,
> they are only recognized as 32mb, and not 64mb as they should be. This
> goes for all of the slots, not just the one SIMM slot on the board. I have
> alread removed and re-installed the sticks one at a time as was
> recommended by a friend savvy with Macs, to no avail... Any thoughts?
>
> Help :)
>
> Dan
€ All DIMMS must be 168-pin,3.3V
unbuffered extended data out(EDO),
60 nanosecond RAM accsess time or faster.
NOTE: 64MB DIMMs must use 11-bit row
address(2 KB refresh)
64MB 3.3v EDO DIMM168-pin, Extended Data
Out (EDO), JEDEC-standard, 64-bit-wide, 2k refresh, 60ns.
That¹s what you should have ! Sorry :-(
--
StarMax is sponsored by <http://lowendmac.com/> and...
/ Buy books, CDs, videos, and more from Amazon.com \
/ <http://www.amazon.com/exec/obidos/redirect-home/lowendmac> \
Support Low End Mac <http://lowendmac.com/lists/support.html>
StarMax list info: <http://lowendmac.com/lists/starmax.html>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:starmax@mail.maclaunch.com>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/starmax%40mail.maclaunch.com/>
iPod Accessories for Less
at 1-800-iPOD.COM
Fast Delivery, Low Price, Good Deal
www.1800ipod.com
