Hi, I'm using the latest stgt release (tgt-20071227) and I see different throughput numbers for READ commands on SLES 10 & RHEL 5.1. I'm using stgt with iSCSI over iSER.
I'm using the same initiator (open-iscsi 865.15 from OFED 1.3 rc4) and the same target machine. The target machine has 2 partitions - one is SLES 10 & the other is RHEL 5.1. When I run READ commands against the target on SLES 10, I get ~400 MB/sec (which is the throughput of the LUN). When I run the same READ commands from the same initiator against the target on RHEL 5.1, I get only 240 MB/sec. Is there anything that I need to config on the RHEL 5.1 machine? BTW - if I run the same test directly from the target machine, I get 400 MB/sec on both distros. Here's the command that I use: sgp_dd if=/dev/sdc of=/dev/null bs=512 bpt=1024 thr=8 time=1 count=20480000 Thanks, Erez _______________________________________________ Stgt-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/stgt-devel
