Hello list!
I'm not a stone cutter in the sense that most of you folks are... I
carve gemstones and do fossil and specimen preparation. I lurk on this
list in hopes of gaining any tidbits of useful info. Of course, I'm not
ruling out the possibility of carving on a larger scale someday
(especially if I find that perfect jade boulder).
Thought I might be able to add a little something to this thread, as
I use pneumatic hammers and scribes frequently in my work ( mine are
probably much smaller in scale than most of yours):
Mark's rule #1) Dissassemble and clean your pneumatics frequently -
that rock dust can get into all kinds of mischief when it gets into your
tools (and it will get into them, no matter how well "sealed" they
are). Keep spare parts on hand - especially O-rings and springs, if
necessary. Some tools can have solvents or cleaners run through them to
clean them, but check with your manufacturer first. I always prefer to
take it apart so I'm sure I get all the dirt out.
Mark's rule #2) After cleaning, and frequently thereafter, oil your
pneumatics. There is no such thing as too much oil (well, there
probably is, but it's a lot). Automatic or in-line oilers are good, but
just to be sure, I frequently put a few drops of air lube into the inlet
of my tools.
Mark's rule #3) Let the tool do the work... That's its job. Don't
force it into working harder than it should. It will complain and you
will be sorry.
Marc's rule #4 (Marc is one of my friends that does fossil prep, too)
Be careful what you run your tool through or around. In fossil
preparation, we frequently need to use epoxies and other glues to
stabilize fragile stone. Marc recently ran his pneumatic scribe through
some unset super glue. I'm sure you can imagine what happened... The
poor scribe just froze up completely. He had to soak it in acetone for
hours just to get it unstuck. Of course then he had to replace all
O-rings and a few other parts.
Don't know if this last tip will be useful to you folks, but thought
I'd throw it out there just in case.
Finally, on the hand vs power tool debate... I say, whatever
floats yer boat. If you're having fun and getting the desired results
with a minimum of frustration, you're doing it the "right" way.
Mark
....................................................................
Learning Stone is hosted free by Spunge.org (http://www.spunge.org).
For list info + help, including subscribe/unsubscribe options,
email message "intro stone" to [EMAIL PROTECTED]