I'm a beginning carver. I've been trying to finish an alabaster piece, my
first in that stone, but haven't been doing well with the fine grain
sandpaper/shoe polish route that worked so well on soapstone. Does anyone
else have suggestions for how best to finish alabaster? If not, I'll try
this linseed oil option first. Thanks!

Peter

At 04:13 AM 6/14/99 -0400, Pamela Glover wrote:
>I did a workshop in Cambridge (UK) a couple of weeks ago on imported
>Zimbabwe stone and there was much discussion amongst those there about
>finishing stone. I was told that linseed oil was good on alabaster by
>someone who carves in it a lot. I have not  tried it myself yet. The high
>polish on the black Zimbabwe stone is obtained by many grades of wet and
>dry down to 1200. The stone is then heated (gently) and a coat of paraffin
>based polish applied. When cool, the excess is wiped off and elbow grease
>with a damp cloth does the rest. The result is spectacular. All this was
>demonstrated by two Zimbabwean sculptors who had been carving the stone
>since they were very small. Warning though, it seems one should not heat
>alabaster in this way. It would probably break up.


............................................................
To get list info + help, including subscribe/unsubscribe
options, email message "intro stone" to [EMAIL PROTECTED]
or visit http://www.learningstone.net/lsemlist.htm


Reply via email to