Hi Louwtjie,
Can you use "fcinfo hba-port" to check your topology?
If it's N Port, then you have to modify qlc.conf to use only loop mode.
Current leadville can't support Point to Point topology.
Thanks,
Reed
Louwtjie Burger wrote:
Hi there
Anyone had experience connecting a 4Gbit FC (Sun - qlc - dual) to a third-party
2Gbit device, yielding the following errors:
qlc: [ID 308162 kern.info] Qlogic qlc FCA Driver v20060630-2.16 (0)
qlc: [ID 630585 kern.info] NOTICE: Qlogic qlc(0): Loop ONLINE
qlc: [ID 694252 kern.info] NOTICE: qlc(0): Firmware version 4.0.23
px_pci: [ID 370704 kern.info] PCI-device: SUNW,[EMAIL PROTECTED], qlc0
genunix: [ID 936769 kern.info] qlc0 is /[EMAIL PROTECTED]/[EMAIL
PROTECTED]/[EMAIL PROTECTED]/SUNW,[EMAIL PROTECTED]
scsi: [ID 243001 kern.warning] WARNING: /[EMAIL PROTECTED]/[EMAIL
PROTECTED]/[EMAIL PROTECTED]/SUNW,[EMAIL PROTECTED]/[EMAIL PROTECTED],0
Lun=0 for target=e4 disappeared
FCP: target=e4 reported NO Luns
PS: The same for qlc1 as well ...
This message posted from opensolaris.org
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
