The iSCSI initiator gives me this information when I do a 'list target -v':
Target: iqn.1986-03.com.sun:02:e4a73e40-ae2b-4e3c-f26d-cf194954b9fe
Alias: pool/volumes/vol
TPGT: 1
ISID: 4000002a0000
Connections: 1
CID: 0
IP address (Local): 192.168.1.106:64236
IP address (Peer): 192.168.1.171:3260
Discovery Method: SendTargets
Login Parameters (Negotiated):
Data Sequence In Order: yes
Data PDU In Order: yes
Default Time To Retain: 20
Default Time To Wait: 2
Error Recovery Level: 0
First Burst Length: 65536
Immediate Data: yes
Initial Ready To Transfer (R2T): yes
Max Burst Length: 262144
Max Outstanding R2T: 1
Max Receive Data Segment Length: 8192
Max Connections: 1
Header Digest: NONE
Data Digest: NONE
And format(1M) gives me this:
AVAILABLE DISK SELECTIONS:
...
8. c9t010000144F29FF4C00002A0045E38980d0 <DEFAULT cyl 1022 alt 2 hd 64
sec 32>
/scsi_vhci/[EMAIL PROTECTED]
In the presence of many iSCSI targets how can I figure out which entry in
format's output corresponds to a particular target as emitted from the
iscsiadm(1M) command? Thanks.
Adam
--
Adam Leventhal, Solaris Kernel Development http://blogs.sun.com/ahl
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
