Sam Storie wrote:
I have a Sun X4600 server with a dual-hba QLogic QLA2462 fibre-channel
card connected to both ports on the "B" interface board in a StorEdge
A5200 array. There is a sparc Solaris 9 server connected to both ports of
the "A" IB, and it has no issues like I'm about to describe.
I am using Solaris 10 6/06 and am having some issues getting the "luxadm
display <Enclosure>" command to see my SES enclosure. I have no problem
seeing the actual disks, but without the luxadm commands I'm used to it's
hard to see where the drives are physically in the array (as well as
other status info). Here's the output of the relevant commands:
....
Is there something obvious I may have missed here? Is this info just not
available on the X64 platform?
If this still occurs after you've upgraded your san patches, then
I think you should log a bug against this under your Sun support
contract. Be prepared to provide a live savecore/crash dump so that
the appropriate engineering team can investigate more thoroughly.
cheers,
James C. McPherson
--
Solaris kernel software engineer
Sun Microsystems
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
