Hi there, first of all I'm *very* new to Solaris OS and for this I'm sorry if
my inexperience may lead to some common error though I've already googled
around this. Now the problem.
I've an IBM branded HBA (Qlogic QLA2200F in fact) and an old Compaq
Storageworks RA4100 SCSI over FC Array (based on the Compaq Array controller
RA4000) and I want to interface these to a Sun Netra T1 200 SPARC machine. The
disk array has the latest available firmware revision and works perfectly on a
Windows machine equipped with the "coupled" Compaq HBA (Agilent Tachyon based).
For now I'm interested ONLY to see the volume presented by RAID controller and
not to work on data on disks.
On the SPARC machine I run Solaris 10 with last Reccomanded patch cluster
installed (in particular: 120346-05 and 119130 are installed) and I'm using Sun
qlc driver (only a Solaris 9 driver from Qlogic is available).
My question is: how can I work with this array getting volumes attached to my
system?
Some significant output:
# cfgadm -o show_SCSI_LUN -al c3
Ap_Id Type Receptacle Occupant Condition
c3 fc-private connected configured unknown
c3::500508b10007e3e0 array-ctrl connected configured unusable
# luxadm probe -p
No Network Array enclosures found in /dev/es
No FC devices found.
# luxadm -e port
/devices/[EMAIL PROTECTED],0/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL
PROTECTED],0:devctl CONNECTED
# luxadm -e dump_map /devices/[EMAIL PROTECTED],0/[EMAIL PROTECTED]/[EMAIL
PROTECTED]/[EMAIL PROTECTED],0:devctl
Pos AL_PA ID Hard_Addr Port WWN Node WWN Type
0 1 7d 0 210000e08b030672 200000e08b030672 0x1f (Unknown
Type,Host Bus Adapter)
1 2 7c 0 500508b10007e3e0 500508b10007e3e0 0xc (Array controller
device)
# fcinfo hba-port -l
HBA Port WWN: 210000e08b030672
OS Device Name: /dev/cfg/c3
Manufacturer: QLogic Corp.
Model: QLA2200
Firmware Version: 2.1.144
FCode/BIOS Version: No Fcode found
Type: L-port
State: online
Supported Speeds: 1Gb
Current Speed: 1Gb
Node WWN: 200000e08b030672
Link Error Statistics:
Link Failure Count: 0
Loss of Sync Count: 1
Loss of Signal Count: 1
Primitive Seq Protocol Error Count: 0
Invalid Tx Word Count: 0
Invalid CRC Count: 0
# fcinfo remote-port -slp 210000e08b030672
Remote Port WWN: 500508b10007e3e0
Active FC4 Types:
SCSI Target: unknown
Node WWN: 500508b10007e3e0
Error: SendRLS failed for 500508b10007e3e0
Error has occured. HBA_ScsiReportLUNsV2 failed. reason BUSY
Last command issue wrote this piece of on /var/adm/sun_fc.debug:
[...]
1185388059:1: FCHBAPort::sendReportLUNs:DEBUG:entered
1185388059:1: scsi_cmd_init:DEBUG:entered
1185388059:1: scsi_cmd_init:DEBUG:exited
1185388059:1: FCHBAPort::sendSCSIPassThru:DEBUG:entered
1185388059:1: HBA::open:DEBUG:entered
1185388059:1: HBA::open:DEBUG:exited
1185388059:1: transportError:DEBUG:entered
1185388059:1: transportError:DEBUG:exited
1185388059:1: HBAException:DEBUG:entered
1185388059:1: HBAException:DEBUG:Error code: 10
1185388059:1: HBAException:STACK:Stack trace follows
1185388059:1: HBAException:STACK: HBAException
1185388059:1: HBAException:STACK: FCHBAPort::sendSCSIPassThru
1185388059:1: HBAException:STACK: FCHBAPort::sendReportLUNs
1185388059:1: HBAException:STACK: Sun_fcScsiReportLUNsV2
1185388059:1: HBAException:DEBUG:exited
1185388059:1: FCHBAPort::sendSCSIPassThru:DEBUG:exited
1185388059:1: FCHBAPort::sendReportLUNs:DEBUG:exited
[...]
Thanks in advance for any suggestion.
Andrea
This message posted from opensolaris.org
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
