After a some patch in gpxe, the problem is still there. iscsitgtd seem to leak memory then: -bash-3.2# ps -efl | grep iscsitgtd 0 S root 625 1 0 40 20 ? 554109 ? 12:17:38 ? 6:03 /usr/sbin/iscsitgtd
554MB instead of 1-2MB used normally... I tried to dtrace iscsi and I have this result: -bash-3.2# head -100 snoop CPU REMOTE IP EVENT BYTES ITT SCSIOP 0 10.48.200.190 login-command 163 16777216 - 0 10.48.200.190 login-response 61 16777216 - 0 10.48.200.190 login-command 173 16777216 - 0 10.48.200.190 login-response 173 16777216 - 0 10.48.200.190 scsi-command 0 33554432 0x12 3 10.48.200.190 scsi-response 0 33554432 - 0 10.48.200.190 scsi-command 0 50331648 0x12 3 10.48.200.190 scsi-response 0 50331648 - 0 10.48.200.190 scsi-command 0 67108864 0x0 3 10.48.200.190 scsi-response 0 67108864 - 0 10.48.200.190 scsi-command 0 83886080 0x25 3 10.48.200.190 data-send 8 83886080 - 0 10.48.200.190 scsi-command 0 100663296 0x25 3 10.48.200.190 data-send 8 100663296 - 0 10.48.200.190 scsi-command 0 117440512 read(10) 0 10.48.200.190 data-send 0 117440512 - 0 10.48.200.190 data-send 0 117440512 - 0 10.48.200.190 data-send 0 117440512 - 0 10.48.200.190 data-send 0 117440512 - 0 10.48.200.190 data-send 0 117440512 - 0 10.48.200.190 data-send 0 117440512 - 0 10.48.200.190 data-send 0 117440512 - 0 10.48.200.190 data-send 0 117440512 - 0 10.48.200.190 data-send 0 117440512 - 0 10.48.200.190 data-send 0 117440512 - 0 10.48.200.190 data-send 0 117440512 - 0 10.48.200.190 data-send 0 117440512 - 0 10.48.200.190 data-send 0 117440512 - 0 10.48.200.190 data-send 0 117440512 - 0 10.48.200.190 data-send 0 117440512 - 0 10.48.200.190 data-send 0 117440512 - 0 10.48.200.190 data-send 0 117440512 - 0 10.48.200.190 data-send 0 117440512 - And dtrace carries on sending the same command. Miro This message posted from opensolaris.org _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
