Vipool- When you say PID, I assume you mean the FibreChannel destination ID (D_ID) of the target device. Correct?
Can you say how you caused this - is it as simple as unplugging the device from the switch and plugging into another, or something else? I'd recommend opening a bug on bugs.opensolaris.org. If you can provide a way to reproduce this with common FC hardware, that would be helpful. Thanks, Aaron Vipool Prajapati wrote: > > Below is the summary of a problem we are having on Solaris10. Can > somebody help provide any insights? > > - Consider the Sun driver has logged into a device with given > PID and PWWN. > > - Consider the device PID changes but PWWN does not > > - The RSCN for the old and new PID are coalesced in the same > RSCN then the driver is not able to login to the new PID without a port > toggle of the device port. > > - Emulex lpfc driver does not have any problem with above test. > > > > HBA model LPe11002 > > Emulex driver we used: 6.20j (lpfc) > > Sun driver we used: 2.21h > (emlxu=11.10.0,REV=2005.01.30.01.58 ) (emlxs=11.10.0,REV=2005.01.30.01.58) > > > > Firmware version LP10000DC 1.90a4 > > FCODE revision LP10000DC none > > > ------------------------------------------------------------------------ > > _______________________________________________ > storage-discuss mailing list > [email protected] > http://mail.opensolaris.org/mailman/listinfo/storage-discuss -- Aaron Dailey Staff Engineer, Sun Microsystems x82025 http://blogs.sun.com/aarondailey _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
