First off, thanks to Sumit et al. for the great work on this amazing project.
I'm a total solaris newbie and have enjoyed tinkering with the OS the past
couple days. The purpose of this whole endeavor is to try to create my own
(cheap) 4GBs fc target and before comstar was available it seemed my options
were non-existent. Anyways, on to my bug.
I have been able to create and register 2 luns from a 1g mkfile and a dynamic
growing file successfully and exported them with no problem (i dont have
access to an initiator client till tomorrow, so i'm assuming that works).
however, i then added an unformated sata disk to the equation because my
ultimate goal is to export raw disks from this machine with the hopes that
those disks could be removed from the solaris box and mounted elsewhere if need
be (this is possible right? if they are exported as raw devices to hosts... i
should be able to put that disk in the host machine without it knowing that
anything happened)
anyways, here is what happened:
a format shows the new disk is up. a prtpart shows its 320GB
i already have 2 LU's registered and i can create the raw disk as a 3rd LU.
However, when i register the 3rd LU i get that assertion failure and core dump.
It does appears to have registered correctly, i can export the view... and
subsequently prtpart says the device is busy... so it looks like it worked.
hopefully it did!
Thanks,
-Manu
below is copied from the terminal.
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1d0 <DEFAULT cyl 30385 alt 2 hd 255 sec 63>
/[EMAIL PROTECTED],0/[EMAIL PROTECTED],2/[EMAIL PROTECTED]/[EMAIL
PROTECTED],0
1. c4d0 <DEFAULT cyl 38911 alt 2 hd 255 sec 63>
/[EMAIL PROTECTED],0/[EMAIL PROTECTED],2/[EMAIL PROTECTED]/[EMAIL
PROTECTED],0
Specify disk (enter its number): ^C
# prtpart
Fdisk information for device /dev/rdsk/c4d0p0
Block Size : 512 bytes
Controller : ide
Disk : cmdk
Capacity : 298 GB
FDISK table NOT VALID
Reminder: dont forget to use either 'p0' or 'D0' device
# sbdadm list-lu
Found 2 LU(s)
GUID DATA SIZE SOURCE
-------------------------------- ------------------- ----------------
6000ae4066000000000047b2f7080002 53687025664 /lun1
6000ae4066000000000047b2f6160001 1073676288 /lun0
# sbdadm create-lu /dev/rdsk/c4d0p0
LU created succesfully.
Assigned GUID is 6000ae4066000000000047b303e00001.
# sbdadm register-lu /dev/rdsk/c4d0p0
Success! Registered the following LU:
GUID DATA SIZE SOURCE
-------------------------------- ------------------- ----------------
6000ae4066000000000047b303e00001 320070287360 /dev/rdsk/c4d0p0
Assertion failed: h->rh_holder == pthread_self(), file ../common/lowlevel.c,
line 126
Abort - core dumped
# sbdadm list-lu
Found 3 LU(s)
GUID DATA SIZE SOURCE
-------------------------------- ------------------- ----------------
6000ae4066000000000047b303e00001 320070287360 /dev/rdsk/c4d0p0
6000ae4066000000000047b2f7080002 53687025664 /lun1
6000ae4066000000000047b2f6160001 1073676288 /lun0
# prtpart /dev/rdsk/c4d0p0
cannot open file: Device busy
This message posted from opensolaris.org
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
