On Feb 26, 2008, at 11:00 AM, Cyril Plisko wrote: > On Tue, Feb 26, 2008 at 5:50 PM, Robert Milkowski > <[EMAIL PROTECTED]> wrote: >> CP> Robert, >> >> >> CP> fcinfo works for me : >> >> What HBA have you got? > > qus12:/root# fcinfo hba-port > HBA Port WWN: 210000e08b873d15 > OS Device Name: /dev/cfg/c2 > Manufacturer: QLogic Corp. > Model: QLE2462 > Firmware Version: 4.0.109 > FCode/BIOS Version: BIOS: 1.18; fcode: 1.17; EFI: 1.5; > > > So, it is QLE2462 > > And that is from snv_78. > >> >> With S10U4+patches, PCIe SAS card, I get: > > SAS ?! Can this be a problem ? AFAIK, fcinfo looks > specifically for FC HBA. (In fact it uses libHBAAPI, > which routes the actual call via /etc/hba.conf) > Odds are that your HBA does not provide a library > for libHBAAPI. >
We are trying to get MPxIO with SAS working with a PCIe based SAS card. I recently was told that if I have a PCIe based SAS card with >4gb of memory then I can't use MPxIO. I'm hoping that we get that sooner than later as it pretty much means I need to (why is FC less than SAS for a 2530 anyways?) go with FC based controllers. Just wish that Sun could have been a little more upfront about the "special situations" in which MPxIO+SAS wouldn't work. > -- > Regards, > Cyril > _______________________________________________ > storage-discuss mailing list > [email protected] > http://mail.opensolaris.org/mailman/listinfo/storage-discuss _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
