Hello Andy, Tuesday, February 26, 2008, 6:12:35 PM, you wrote:
AL> On Feb 26, 2008, at 11:00 AM, Cyril Plisko wrote: >> On Tue, Feb 26, 2008 at 5:50 PM, Robert Milkowski >> <[EMAIL PROTECTED]> wrote: >>> CP> Robert, >>> >>> >>> CP> fcinfo works for me : >>> >>> What HBA have you got? >> >> qus12:/root# fcinfo hba-port >> HBA Port WWN: 210000e08b873d15 >> OS Device Name: /dev/cfg/c2 >> Manufacturer: QLogic Corp. >> Model: QLE2462 >> Firmware Version: 4.0.109 >> FCode/BIOS Version: BIOS: 1.18; fcode: 1.17; EFI: 1.5; >> >> >> So, it is QLE2462 >> >> And that is from snv_78. >> >>> >>> With S10U4+patches, PCIe SAS card, I get: >> >> SAS ?! Can this be a problem ? AFAIK, fcinfo looks >> specifically for FC HBA. (In fact it uses libHBAAPI, >> which routes the actual call via /etc/hba.conf) >> Odds are that your HBA does not provide a library >> for libHBAAPI. >> AL> We are trying to get MPxIO with SAS working with a PCIe based SAS AL> card. I recently was told that if I have a PCIe based SAS card with >>4gb of memory then I can't use MPxIO. I'm hoping that we get that AL> sooner than later as it pretty much means I need to (why is FC less AL> than SAS for a 2530 anyways?) go with FC based controllers. Just AL> wish that Sun could have been a little more upfront about the "special AL> situations" in which MPxIO+SAS wouldn't work. Actually with mpt patch revision -13 it works fine - just make sure you backout the latest one and apply -13. -- Best regards, Robert mailto:[EMAIL PROTECTED] http://milek.blogspot.com _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
