Hi, I would like to know if you have any information on the following problem I am seeing:
My environment: The server is a M4000 Sun Server. The OS is Solaris 10 8/07. The HBA is Qlogic 2462 dual port HBA. The driver is qlc(leadville). The SAN switch is a Brocade, model unsure of. The tape library is an SL500 storageTek with 2 Fibre attached (HP UltraS???4) tape drives to my SAN switch. I also have 10 LSI storage arrays on the same SAN switch. Problem: My server doesn't recognize the tape library on the SAN switch. From the SAN, I do a 'switchShow' and the SAN switch recognizes the tape library by its port WWN properly. My server recognizes all of my luns on the SAN that are apart of LSI storage arrays. When I run cfgadm -al from the server, I don't see the tape drives or the robot. I tried to reboot -- -r, devfsadm. I also tried to configure the /kernel/drv/st.conf file with the correct vender/productID of my product. STK^^^^^SL500 Should I be able to see the tape drives with the leadville driver with the cfgadm -al? Should I even need to configure any /kernel/drv/* files? Am I barking up the wrong tree with the st.conf configuration? I also tried to take the server down the ok> prompt and run a probe-scsi-all but only the luns on the LSI array showed up, not the tape library. I don't have any errors in the /var/adm/message file. I also updated /kernel/drv/qlc.conf to enable extensive logging, but no errors showed up in the log. I disabled STMSboot for all of this testing. If I enable STMSboot should I still be able to see the tape libraries? Thanks in advance. Please let me know if I can provide any other details about the problem/incompetency... This message posted from opensolaris.org _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
