James, where would I find the HBA firmware updates? I'm looking at Sunsolve and LSI but can't seem to locate them? I'm on their original level I believe, so I probably need an update.
I see some messages in the log: Mar 31 08:41:58 xxxxx pcisch: [ID 291552 kern.warning] WARNING: [EMAIL PROTECTED]: mpt.conf properties not merged and then later... Mar 31 08:42:51 xxxxx scsi: [ID 799468 kern.info] sd5 at scsi_vhci0: name g600a0b80002fcda6000006d847eba1d6, bus address g600a0b80002fcda6000006d847eba1d6 Mar 31 08:42:51 xxxxx genunix: [ID 936769 kern.info] sd5 is /scsi_vhci/[EMAIL PROTECTED] Mar 31 08:42:51 xxxxx genunix: [ID 408114 kern.info] /scsi_vhci/[EMAIL PROTECTED] (sd5) online Mar 31 08:42:51 xxxxx genunix: [ID 834635 kern.info] /scsi_vhci/[EMAIL PROTECTED] (sd5) multipath status: degraded, path /[EMAIL PROTECTED],600000/LSILogic,[EMAIL PROTECTED] (mpt0) to target address: 0,1 is online Load balancing: round-robin Mar 31 08:43:12 xxxxx scsi: [ID 243001 kern.info] /[EMAIL PROTECTED],600000/LSILogic,[EMAIL PROTECTED] (mpt1): Mar 31 08:43:12 xxxxx mpt1: Initiator WWNs: 0x500605b0002d3710-0x500605b0002d3717 Mar 31 08:43:12 xxxxx pcisch: [ID 370704 kern.info] PCI-device: LSILogic,[EMAIL PROTECTED], mpt1 Mar 31 08:43:12 xxxxx genunix: [ID 936769 kern.info] mpt1 is /[EMAIL PROTECTED],600000/LSILogic,[EMAIL PROTECTED] Mar 31 08:43:12 xxxxx scsi: [ID 193665 kern.info] sd18 at mpt1: target 1 lun 0 Mar 31 08:43:12 xxxxx genunix: [ID 936769 kern.info] sd18 is /[EMAIL PROTECTED],600000/LSILogic,[EMAIL PROTECTED]/[EMAIL PROTECTED],0 Mar 31 08:43:13 xxxxx genunix: [ID 408114 kern.info] /[EMAIL PROTECTED],600000/LSILogic,[EMAIL PROTECTED]/[EMAIL PROTECTED],0 (sd18) online Mar 31 08:43:13 xxxxx genunix: [ID 834635 kern.info] /scsi_vhci/[EMAIL PROTECTED] (sd5) multipath status: optimal, path /[EMAIL PROTECTED],600000/LSILogic,[EMAIL PROTECTED] (mpt1) to t arget address: 1,1 is standby Load balancing: round-robin Mar 31 08:43:14 xxxxx scsi: [ID 799468 kern.info] ses4 at scsi_vhci0: name g600a0b80002fcc4d0000000000000000, bus address g600a0b80002fcc4d0000000000000000 Mar 31 08:43:14 xxxxx genunix: [ID 936769 kern.info] ses4 is /scsi_vhci/[EMAIL PROTECTED] Mar 31 08:43:14 xxxxx genunix: [ID 408114 kern.info] /scsi_vhci/[EMAIL PROTECTED] (ses4) online Mar 31 08:43:14 xxxxx genunix: [ID 834635 kern.info] /scsi_vhci/[EMAIL PROTECTED] (ses4) multipath status: degraded, path /[EMAIL PROTECTED],600000/LSILogic,[EMAIL PROTECTED] (mpt1) to target address: 1,1f is online Load balancing: round-robin Mar 31 08:43:14 xxxxx scsi: [ID 799468 kern.info] ses5 at scsi_vhci0: name g600a0b80002fcda60000000000000000, bus address g600a0b80002fcda60000000000000000 Mar 31 08:43:14 xxxxx genunix: [ID 936769 kern.info] ses5 is /scsi_vhci/[EMAIL PROTECTED] Mar 31 08:43:14 xxxxx genunix: [ID 408114 kern.info] /scsi_vhci/[EMAIL PROTECTED] (ses5) online Mar 31 08:43:14 xxxxx genunix: [ID 834635 kern.info] /scsi_vhci/[EMAIL PROTECTED] (ses5) multipath status: degraded, path /[EMAIL PROTECTED],600000/LSILogic,[EMAIL PROTECTED] (mpt0) to target address: 0,1f is online Load balancing: round-robin I just booted the machine this morning and it was missing the LUN as usual, and I ran devfsadm. Didn't pick it up. I don't think I've seen it pop up over time but I'll try to leave the box running longer to see if it does. It's a bit hard to diagnose this without rebooting a lot though. I am also working on the array firmware update now, and I'll see what happens after that. This message posted from opensolaris.org _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
