Hi all,
We are unable to get our Infiniband card activated
- we are using opensolaris B78 (but also tested solaris 10)
- IB card is Dual port Melanox MHEA28-1TC
- Motherboard is Tyan GT24-B3992-E
- PCI Express chipset is BCM5780
I installed the driver for bcme, networking is OK but ibd0 & ibd1
can not be plumbed.
We have same type of IB card working on supermicro board & dell 1950
but we can't get it working on this MB.
When we use fwflash to check firware , it segfaults because
/devices/[EMAIL PROTECTED],0/pci1166,132/
just does not exist, it seems for me that the PCI bus is not
activated or something althought the device is correctly discovered
if we check prtconf -v output (see below). I noticed the driver not
attached message.
I installed dmidecode to check bios version:
SMBIOS 2.3 present.
61 structures occupying 2422 bytes.
Table at 0x000FB210.
Handle 0x0000
DMI type 0, 20 bytes.
BIOS Information
Vendor: American Megatrends Inc.
Version: 'V1.02.B10 '
Release Date: 11/30/2007
We also tried to upgrade bios to latest available tyan firmware but
here we get an incorrect ROM ID error message so we cannot upgrade.
[EMAIL PROTECTED]:21 PM-~]# fwflash -l
List of available devices:
Device[0], /devices/[EMAIL PROTECTED],0/pci1166,132/pci15b3,6278:devctl
fwflash_ib_open: No such file or directory
Segmentation Fault (core dumped)
#
# cfgadm -a
Ap_Id Type Receptacle
Occupant Condition
ib IB-Fabric connected
configured ok
ib::daplt,0 IB-PSEUDO connected
unconfigured unknown
ib::rdsib,0 IB-PSEUDO connected
unconfigured unknown
ib::rpcib,0 IB-PSEUDO connected
unconfigured unknown
ib::sdpib,0 IB-PSEUDO connected
unconfigured unknown
usb0/1 unknown empty
unconfigured ok
usb0/2 unknown empty
unconfigured ok
usb1/1 unknown empty
unconfigured ok
usb1/2 unknown empty
unconfigured ok
usb2/1 unknown empty
unconfigured ok
usb2/2 unknown empty
unconfigured ok
usb2/3 unknown empty
unconfigured ok
usb2/4 unknown empty
unconfigured ok
pci15b3,6278 (driver not attached)
Hardware properties:
name='assigned-addresses' type=int items=15
value
=
83050010.00000000
.ff500000.00000000.00100000
.c3050018.00000000
.cf000000.00000000.00800000.c3050020.00000000.c000000
0.00000000.08000000
name='reg' type=int items=20
value
=
00050000.00000000.00000000.00000000.00000000.03050010.00000000.00000000.00000000.00100000.43050018.00000000.0000000
0.00000000.00800000.43050020.00000000.00000000.00000000.08000000
name='compatible' type=string items=13
value='pciex15b3,6278.15b3.6278.a0' +
'pciex15b3,6278.15b3.6278' + 'pciex15b3,6278.a0' + 'pciex15b3,6278'
+ 'pciexclass,0
c0600' + 'pciexclass,0c06' + 'pci15b3,6278.15b3.6278.a0' +
'pci15b3,6278.15b3.6278' + 'pci15b3,6278' + 'pci15b3,6278.a0' +
'pci15b3,6278' + 'pcic
lass,0c0600' + 'pciclass,0c06'
name='model' type=string items=1
value='InfiniBand'
name='power-consumption' type=int items=2
value=00000001.00000001
name='devsel-speed' type=int items=1
value=00000000
name='interrupts' type=int items=1
value=00000001
name='subsystem-vendor-id' type=int items=1
value=000015b3
name='subsystem-id' type=int items=1
value=00006278
name='unit-address' type=string items=1
value='0'
name='class-code' type=int items=1
value=000c0600
name='revision-id' type=int items=1
value=000000a0
name='vendor-id' type=int items=1
value=000015b3
name='device-id' type=int items=1
value=00006278
name='pcie-capid-pointer' type=int items=1
value=00000060
name='pcie-capid-reg' type=int items=1
value=00000001
pci1166,132 (driver not attached)
Hardware properties:
name='acpi-namespace' type=string items=1
value='\_SB_.PCI0.BR32'
name='slot-names' type=int items=3
value=00000001.746f6c53.00000037
name='reg' type=int items=5
value=00004800.00000000.00000000.00000000.00000000
name='compatible' type=string items=8
value='pciex1166,132.b0' + 'pciex1166,132' +
'pciexclass,060400' + 'pciexclass,0604' + 'pci1166,132.b0' +
'pci1166,132' + 'pc
iclass,060400' + 'pciclass,0604'
name='model' type=string items=1
value='PCI-PCI bridge'
name='bus-range' type=int items=2
value=00000006.00000006
name='#size-cells' type=int items=1
value=00000002
name='#address-cells' type=int items=1
value=00000003
name='device_type' type=string items=1
value='pciex'
name='power-consumption' type=int items=2
value=00000001.00000001
name='devsel-speed' type=int items=1
value=00000000
name='unit-address' type=string items=1
value='9'
name='class-code' type=int items=1
value=00060400
name='revision-id' type=int items=1
value=000000b0
name='vendor-id' type=int items=1
value=00001166
name='device-id' type=int items=1
value=00000132
name='pcie-capid-pointer' type=int items=1
value=000000b0
name='pcie-capid-reg' type=int items=1
value=00000041
Does anybody knows how to fix this kind of issue?
Thanks in advance.
Krdoor
This message posted from opensolaris.org
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
