On Fri, Aug 01, 2008 at 01:20:36PM -0700, Nigel Smith wrote:
> I have not seen any reports on this forum of testing with the AIX
> initiator. Albert, have you tried it?
I have now, with AIX 5.3.
> Did it work or did you have problems?
It is not working. The AIX 5.3 iSCSI initiator does see the LUNs defined
on the Solaris b91 target but cannot access them. I also tried the AIX
6.1 iSCSI initiator and see the same problem.
aix# lsdev -Cc disk
hdisk0 Available 00-08-00 SAS Disk Drive
hdisk1 Available 00-08-00 SAS Disk Drive
hdisk2 Available Other iSCSI Disk Drive
hdisk3 Available Other iSCSI Disk Drive
A wireshark dump shows:
(initiator) Login Command
(target) Login Response (Success)
(initiator) SCSI: Test Unit Ready LUN: 0x00
(target) SCSI: Response LUN: 0x00 (Test Unit Ready) (Good)
(initiator) SCSI: Reserve(6) LUN: 0x00
(target) SCSI Response (Check Condition) LUN: 0x00
iSCSI (SCSI Response)
Opcode: SCSI Response (0x21)
Flags: 0x80
Response: Command completed at target (0x00)
Status: Check Condition (0x02)
TotalAHSLength: 0x00
DataSegmentLength: 0x00000016
InitiatorTaskTag: 0x00000001
StatSN: 0x00000002
ExpCmdSN: 0x0bfffe0d
MaxCmdSN: 0x0bfffe4b
ExpDataSN: 0x00000000
BidiReadResidualCount: 0x00000000
ResidualCount: 0x00000000
Request in: 12
Time from request: 0.000107000 seconds
SenseLength: 0x0014
SCSI: SNS Info
[LUN: 0x0000]
Valid: 0
.111 0000 = SNS Error Type: Current Error (0x70)
Filemark: 0, EOM: 0, ILI: 0
.... 0101 = Sense Key: Illegal Request (0x05)
Sense Info: 0x00000000
Additional Sense Length: 0
Command-Specific Information: 00000000
Additional Sense Code+Qualifier: Invalid Command Operation Code (0x2000)
Field Replaceable Unit Code: 0x00
.. = SKSV: False
Sense Key Specific: 000000
> If problems, with which version of the iscsi target?
> Solaris 10 or OpenSeolaris/Nevada?
Nevada, b91.
--
albert chin ([EMAIL PROTECTED])
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
