Hi All I have connected PowerEdge 2950 to MD1000 ( SAS Enclosure) using PERC 6/E (LSI 1078 Controller) RAID controller.
Through the mega_sas driver, I am able to see the drives and read/write data to it. I am also trying to obtain SES (SCSI Enclosure Services) info from the MD1000 to know the status of the power supplies, fans etc. In linux, using sg3_utils (http://freshmeat.net/projects/sg3_utils/) I am able to obtain all the information necessary. I think the issue is that ses device is not created by OpenSolaris. I have tried various settings in /kernel/drv/ses.conf, including the one below, but I am unable to obtain the device. name="ses" class="scsi" parent="mega_sas" target=0 lun=0; What I am trying to achieve is what Eric Shrock has done with SUN JS4400 storage array as shown in http://blogs.sun.com/eschrock/category/OpenSolaris I have tried googling a lot on ses.conf, but they mainly talk about connecting FC enclosures using luxadm etc. If you have any suggestions or pointers on what I should try that would be really helpful. Thanks -- This message posted from opensolaris.org _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
