even with proper st.conf entry , i don't see any difference. it is same result.
$ mt -f /dev/rmt/0n rew $ mt -f /dev/rmt/0n status SONY SDX-1100 AIT5 8mm tape drive: sense key(0x0)= No Additional Sense residual= 0 retries= 0 file no= 0 block no= 0 $ amlabel -f tape1 tape1-0002 Reading label... Found Amanda tape tape1-0002, tape is active Writing label tape1-0002.. amlabel: Error closing device: Error writing final filemark: Permission denied. $ $ mt -f /dev/rmt/0n status <<<<<<<<<<<< says write protected SONY SDX-1100 AIT5 8mm tape drive: sense key(0x7)= Write Protected residual= 0 retries= 0 file no= 1 block no= 0 $ mt -f /dev/rmt/0n status <<<<<<< same tape returns good status for consecutive mt status SONY SDX-1100 AIT5 8mm tape drive: sense key(0x0)= No Additional Sense residual= 0 retries= 0 file no= 1 block no= 0 $ amlabel -f tape1 tape1-0002 Reading label... Found Amanda tape tape1-0002, tape is active Writing label tape1-0002.. Checking label... Success! $ -- This message posted from opensolaris.org _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
