I can now get the deployment to finish. I ran snoop on the OpenSolaris box and had a warnings about MTU size:
(warning) packet length greater than MTU in buffer offset I fixed this by enabling jumbo frames in the config file for my e1000 NICs. 2008/12/12 Peter Rosenthal <[email protected]> > Hello, > > I am using iscsitgtd via zfs shareiscsi=on. I am attempting to use it to > store an ESX VMFS volume and I'm having a few difficulties. I have no > problems with the initiator connecting to the target, I can format the > device and everything looks good. However, when I attempted to deploy a 4GB > VM to the store it failed around 94% with 'time out' and there are several > messages in the ESX log: > > Dec 12 11:06:27 vmlab03 vmkernel: 0:08:14:37.142 cpu1:1031)Fil3: 5004: > WRITE error 0xbad00e5 > > Dec 12 11:06:59 vmlab03 vmkernel: 0:08:15:09.146 cpu1:1031)Fil3: 5004: > WRITE error 0xbad00e5 > Dec 12 11:06:59 vmlab03 vmkernel: 0:08:15:09.146 cpu1:1031)Fil3: 9875: Max > timeout retries exceeded for caller 0x8e42bb (status 'Timeout') > > Dec 12 11:07:09 vmlab03 vmkernel: 0:08:15:19.793 cpu0:1024)VMNIX: VMFS: > 245: timed out > Dec 12 11:07:20 vmlab03 vmkernel: 0:08:15:30.800 cpu1:1037)FS3: 4831: > Reclaimed timed out heartbeat [HB state abcdef02 offset 4094976 gen 23 stamp > 29695268365 uuid 49424 > 253-77842959-564d-000a5e01e1db jrnl <FB 231603> drv 4.31] > > In many ways it seems to be like: > http://opensolaris.org/jive/thread.jspa?messageID=310330 > > But I am not using broadcom, nor do I have I/O AT module listed when I do > modinfo. > > Anyone have any suggestions on how I should proceed with debugging this > from the OpenSolaris side? I am running 2008.11 > >
_______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
