Today I tried to setup a comstar iscsi target.
- I updated my opensolaris 2008.11 to build 105.
- disabled iscsitgtd
- installed SUNWiscsit pkg
- enabled stmf
Then I checked the docs, and there is still 1 thing I don't understand.
The admin guide says, to create a target run:
itadm create-target
So I did, this was the response:
Target iqn.1986-03.com.sun:02:4b60173a-25c8-44eb-f307-efce316df001 successfully
created
Then I had to create the LU:
sbdadm create-lu /dev/zvol/rdsk/storagepoolb/vista
Created the following LU:
GUID DATA SIZE SOURCE
-------------------------------- ------------------- ----------------
600144f075a6410000004977b0b30003 26843480064
/dev/zvol/rdsk/storagepoolb/vista
Next step was to create the view:
(to make a logical unit available to all initiator hosts on a storage network)
stmfadm list-view -l 600144F077000000000048C62BF00001
stmfadm: 600144f077000000000048c62bf00001: no views found
-bash-3.2# stmfadm add-view 600144f077000000000048c62bf00001
But what happens when I create multiple targets at once, How can someone find
out which target (iqn) is mapped to which LU ?? I don't see the link when we
don't create host groups.
(In the past you saw this mapping via iscsitadm list target -v)
Anyway I tried to connect from a windows initiator and the disk was connected
(directly after discovering, I even did not had to choose the target), so it
seems to work.
Then I tried to boot from this exposed volume, via gpxe. For some reason this
is not working (I'm getting input/Output Error). Using snoop to capture the
packets, I see I'm getting: Check Condition as response to a Read Capacity(10)
request. I attached the snoop file so people can look into.
Thanks in advance for any response.
Kristof
--
This message posted from opensolaris.org
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
