On Wed, Apr 15, 2009 at 8:52 AM, Milan Jurik <[email protected]> wrote:
> Hi Alastair, > > I am CCing storage-discuss@ as the best place for this question and > Bccing the rest. > > V út, 14. 04. 2009 v 18:00, Alastair Neil píše: > > I see these messages in my logs of my snv_111 system. I see messages > > for every target, the targets are openfiler 2.3 Linux systems. The > > switches are 24 port dell powerconnect gigabit switches with jumbo > > frames enabled and the interfaces are all intel eepro 1000 ans all > > have MTU set to 9000. > > > > Apr 14 11:11:49 vsnfs-01 Not enough sense information > > Apr 14 11:11:49 vsnfs-01 scsi: [ID 583861 kern.info] sd12 at iscsi0: > > name 0000iqn.2006-01.com.openfiler%3Atsn.vsof-02-u20001,0, bus address > > 0000iqn.2006-01.com.openfiler%3Atsn.vsof-02-u20001,0 > > > > > http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/scsi/targets/sd.c#16999 > > I do not know from where SUN_MIN_SENSE_LENGTH as 4 is comming but it is > there for many years and looks reasonable. > > Several possibilities: > > 1) Solaris is not decoding SCSI packet correctly > 2) your targets have problems > > Could you look at data on TCP level and decode them with wireshark? > > > > > Am I missing something in the setup? I am trying to use these targets > > as mirrored elements of a zpool. > > > > I do not know Linux iSCSI targets, so it can be config issue. Thanks for the reply. I guess I'll go and subscribe to opensolaris-storage. These systems have been used without issue with linux clients. I am attempting to obtain a response from the openfiler community. In the mean time I'll see if I can generate a wireshark dump of the traffic, do you know if there is a wireshark package available for opensolaris? Regards, Alastair
_______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
