I don't know if it's my network setup or what at this point, but
during my benchmarks I am unable to get more then 20-23MB/s doing 4k
sequential reads with 4 outstanding I/Os. This is constant whether
going to a ZVOL or a soft partition.
My setup:
Server: Dell PE 2950, 2 quad xeons, 4GB memory, 2 on board bnx
(management network only), intel quad igb running LAG to a layer 3
switch, flow control and jumbo frames enabled, Solaris 10 update 7
with all the latest patches installed. Storage is 14 SAS 15k in a
MD1000 enclosure hooked up to a Dell PERC 6e w/ 512MB of BBU write-
back cache, disks setup as individual RAID0 disks, then put in a zpool
as 2 raidz2 sets of 7 drives each. I have the write-back enabled on
each disk for ZIL performance since I don't have an SSD disk for ZIL
logging.
Client ESX windows 2003r2 guest running MS ini 2.08.
I believe the switch and the ESX are setup properly tests against a
Linux host running IET and HW RAID6 show it's capable of around
30-40MB/s.
Any feedback on this would be appreciated as I am getting a little
burnt out trying to diagnose this.
-Ross
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
