Hello,
It's Opensolaris 111b on x86.
I'm trying to configure Adaptec 5085 to work in JBOD mode.
It has 8 SATA disk connected. If disks are configured in array mode
(each disk has 1 array) - Solaris recognizes it on the fly.
r...@zsan0:~# cfgadm -lav
Ap_Id Receptacle Occupant Condition
Information
When Type Busy Phys_Id
c7 connected configured unknown
unavailable scsi-bus n
/devices/p...@0,0/pci8086,2...@2/pci8086,3...@0/pci8086,3...@0/pci9005,2...@0:scsi
c7::dsk/c7t0d0 connected configured unknown
Adaptec RAID 5805
unavailable disk n
/devices/p...@0,0/pci8086,2...@2/pci8086,3...@0/pci8086,3...@0/pci9005,2...@0:scsi::dsk/c7t0d0
c7::dsk/c7t1d0 connected configured unknown
Adaptec RAID 5805
unavailable disk n
/devices/p...@0,0/pci8086,2...@2/pci8086,3...@0/pci8086,3...@0/pci9005,2...@0:scsi::dsk/c7t1d0
And so on, altogether 8 disks.
After configuring JBOD with 8 disk Solaris can see only controller:
sad...@zsan2:~$ cfgadm -lav
Ap_Id Receptacle Occupant Condition
Information
When Type Busy Phys_Id
c7 connected unconfigured unknown
unavailable scsi-bus n
/devices/p...@0,0/pci8086,2...@2/pci8086,3...@0/pci8086,3...@0/pci9005,2...@0:scsi
r...@zsan2:~# cfgadm -c configure c7
cfgadm: Hardware specific failure: failed to get state for SCSI bus: No
such device or address
Can it be configured to work with JBOD?
Thanks,
Roman
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
