Hi! Im having problems recognizing my sata drives connected to an onboard Jmicron 363 SATA controller.
specifically im getting the error: WARNING: ahci0: ahci_port_reset port 0 the device hardware has been initialized and the power-up diagnostics failed Motherboard is Asus M2N-SLI Deluxe. Nvidia SATA controller works just fine on this board with opensolaris Im Running Opensolaris 1002 build 118 excerpt from system log: Jul 26 15:17:05 Videodrome ahci: [ID 405770 kern.info] NOTICE: ahci0: hba AHCI version = 1.0 Jul 26 15:17:05 Videodrome unix: [ID 954099 kern.info] NOTICE: IRQ16 is being shared by drivers with different interrupt levels. Jul 26 15:17:05 Videodrome This may result in reduced system performance. Jul 26 15:17:05 Videodrome isa: [ID 202937 kern.info] ISA-device: pit_beep0 Jul 26 15:17:05 Videodrome genunix: [ID 936769 kern.info] pit_beep0 is /p...@0,0/i...@1/pit_beep Jul 26 15:17:05 Videodrome fdc: [ID 114370 kern.info] fd0 at fdc0 Jul 26 15:17:05 Videodrome genunix: [ID 936769 kern.info] fd0 is /p...@0,0/i...@1/f...@1,3f0/f...@0,0 Jul 26 15:17:16 Videodrome ahci: [ID 860969 kern.warning] WARNING: ahci0: ahci_port_reset port 0 the device hardware has been initialized and the power-up diagnostics failed Jul 26 15:17:28 Videodrome ahci: [ID 860969 kern.warning] WARNING: ahci0: ahci_port_reset port 1 the device hardware has been initialized and the power-up diagnostics failed (the drives connected are at sata4/0 and 4/1) #cfgadm -la Ap_Id Type Receptacle Occupant Condition sata1/0::dsk/c9t0d0 disk connected configured ok sata1/1::dsk/c9t1d0 disk connected configured ok sata2/0::dsk/c10t0d0 disk connected configured ok sata2/1::dsk/c10t1d0 disk connected configured ok sata3/0::dsk/c11t0d0 disk connected configured ok sata3/1::dsk/c11t1d0 disk connected configured ok sata4/0 unknown connected unconfigured unknown sata4/1 unknown connected unconfigured unknown usb5/1 unknown empty unconfigured ok usb5/2 unknown empty unconfigured ok usb5/3 unknown empty unconfigured ok usb5/4 unknown empty unconfigured ok usb5/5 unknown empty unconfigured ok usb5/6 usb-kbd connected configured ok usb5/7 unknown empty unconfigured ok usb5/8 unknown empty unconfigured ok usb5/9 unknown empty unconfigured ok usb5/10 unknown empty unconfigured ok usb6/1 unknown empty unconfigured ok usb6/2 usb-storage connected configured ok usb6/3 unknown empty unconfigured ok usb6/4 unknown empty unconfigured ok usb6/5 unknown empty unconfigured ok usb6/6 unknown empty unconfigured ok usb6/7 unknown empty unconfigured ok usb6/8 unknown empty unconfigured ok usb6/9 unknown empty unconfigured ok usb6/10 unknown empty unconfigured ok # cfgadm -c configure sata4/1 cfgadm: Hardware specific failure: Failed to config device at ap_id: /devices/p...@0,0/pci10de,3...@e/pci1043,8...@0:1 -- This message posted from opensolaris.org _______________________________________________ storage-discuss mailing list storage-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/storage-discuss
